Eastwood 54500A Features:

All-In-One Eastwood Welder When you want a Multi-Process machine that's built to deliver great results with no compromises, you need the Eastwood Elite MP250i. It has all of the features of a standard DC TIG Welder like High Frequency Start and a Rocker Style Foot Pedal so when you switch from MIG to TIG you know you're going to get the same great results you'd expect from a dedicated TIG machine. When you're doing a full-scale auto restoration, sometimes one welding function, whether its MIG or TIG, isn't going to be enough. This machine is completely plumbed for MIG and TIG welding, and the cart holds a gas bottle for each so you can almost instantly switch between functions without changing hoses and regulators like you would with other units. That means everything stays connected and ready to weld, and with a flip of a switch you can go from MIG to TIG welding when you're working on body panels, roll cages, custom-fab parts or other work. Weld thin sheet metal or up to ½-inch steel plate using these versatile machines. The Elite MP250i doesn't stop there either. You can also stick weld aluminum or add an optional spool gun for MIG welding aluminum. The Eastwood MP250i Multi-Process 250 Amp Welder

Features:

• Operates on either 120 or 240V Welds steel and stainless Welds aluminum, with optional spool gun IGBT inverter based power supply MIG Welds thin steel sheet metal or up to ½ inch steel plate TIG Welds chrome moly tubing or thin steel sheet metal or stainless up to 3/8 inch thick Arc Welds up to ½ inch steel and stainless Welds aluminum up to 1/4 inch with a spool gun (item 20172 sold separately) Hold either 8 or 12 inch wire spools Square Wave Inverter Fully independent MIG and TIG Gas Systems 10 feet long power cord so you can weld anywhere Holds 2 bottles for both MIG and TIG welding All 3 torches are more than 12 feet long Extra long TIG foot pedal (15.9') Includes gas flow meter Side hooks for easy cable storage True DC TIG welder with foot pedal and high frequency start! WP17 TIG Torch included for greater flexibility Awesome 60% Duty Cycle at the full 250 amps! Why Do You Need This Multi-Process Welder? You want a welder that allows you to Stick, MIG and TIG weld. And you're probably interested in this unit because you'll be able to MIG and TIG weld with a single powerf
  • Power Voltage (V):
  • 1 phase 240V +/
  • 10%
  • 1 phase 120V +/
  • 10%
  • Frequency (Hz): 50/60
  • No Load Voltage (V): 56V
  • Rated Input Current (Amps):
  • 240V:
  • MIG = 47.3
  • TIG = 35.7
  • ARC = 53.5
  • 120V:
  • MIG = 42
  • TIG = 31.2
  • ARC = 51.1
  • Output Current Adjustment (Amps):
  • 240V:
  • MIG = 50-250
  • TIG = 15-250
  • ARC = 25-250
  • 120V:
  • MIG = 50-140
  • TIG = 15-140
  • ARC = 25-140
  • Output Voltage (V):
  • 240V:
  • MIG = 16.5-26.5
  • TIG = 10.6-20
  • ARC = 21-30
  • 120V:
  • MIG = 16.5-21
  • TIG = 10.6-15.6
  • ARC = 21-25.6
  • Duty Cycle: 60% @ 250 AMPS @ 240 VAC and 60% @ 140 AMPS @ 120 VAC
  • Power Factor: 0.73
  • Efficiency: 80%
  • Wire Feed Speed (in/min): 78-629
  • Post Flow Time (seconds):
  • MIG 1.0 +/
  • 0.05
  • TIG 5.0 +/
  • 0.5
  • TIG Welding Starting Method: High Frequency Start
  • Cooling Method: Fan
  • Gas System: Fully Independent MIG and TIG Systems
  • Gas Flowmeter: Brass, CO2/Argon Compatible
  • Welding Gas Bottle Capacity: Two 80 cu ft Cylinders
  • Weight: 159.83 lbs. (72.3 kg)
  • Plug Type: NEMA 6-50P
  • MP250i Duty Cycle: 60% at 250 Amps
  • Welding Time: 6 Minutes with 4 Minutes of cooling in a 10 Minute block at 250 Amps
  • Over Duty Cycle: Welder automatically shuts off; fan continues to run
  • Safe Temperature: Welder output automatically switches back on when safe
  • Increase Duty Cycle: Turn down the Voltage Output control
  • Shipping Note: MP250I does not qualify for Free Shipping promotions