Eastwood 58015 Features:

Designed with hobbyists and novice welders in mind, the Eastwood MIG 90 is perfect for light repair and fabrication projects. Operating on standard 120V household power, its capable of welding steel up to 1/8-in thick, making it ideal for sheet metal. Choose from MIG (requires shielding gas, not included) or gasless flux-core welding operation. Unlike many of its direct competitors, the MIG 90 is equipped with all the accessories you need to start MIG welding as soon as you open the box. Included with the welder are a gas regulator and hose, a MIG torch with nozzle and 0.023-in. contact tip, an 8-ft ground cable, additional contact tips (0.023-in. and 0.030-in.), a welding brush/hammer, and more. Just connect your own gas bottle and youre off and welding. If you prefer to run without gas, the MIG 90 also doubles as a flux welder. Simply replace the MIG wire with flux-core wire. The MIG 90 uses commonly available consumables, including a Tweco-style torch, making it easy to pick up replacement tips and nozzles at virtually any welding supply shop anywhere. Of course, Eastwood always stocks a full selection of replacement parts and consumables as well. Were so confident youll love the MIG 90 that we back it up with Eastwoods no-hassle return policy and a full 3-year warranty. Eastwood MIG 90

Features:

• Easy-to-use welder is perfect for hobbyists and novicesIdeal for light repair and fabrication projects up to 1/8-in steelGas regulator and hose includedUses either 0.023-in or 0.030-in MIG or flux-core wire in 4-in (2-lb) spoolTweco-style torch uses commonly available consumables for convenienceAdjustable power output from 30-90 amps for precisionOperates on standard 120V household power supply25% duty cycle at 90 amps (60% at full 65 amps)Lightweight and portable - weighs less than 15 lbsBacked by Eastwood's no-hassle return policy and 3-year warranty
  • Recommended Breaker Size: 20 amp
  • Minimum Breaker Size: 15 amp
  • Input Voltage: 1 Phase, 120VAC, 50/60 Hz
  • Power Cord Receptacle Plug: NEMA 5-15P
  • Max Voltage at No Load: 56 V DC
  • Rated Duty Cycle: 25% @ 90 Amps, 60% @ 65 Amps, 100% @ 50 Amps
  • Torch Consumables: Tweco style nozzle and contact tips
  • Wire Feed Rate (IPM/Inches Per Minute): 80
  • 278 IPM
  • Wire Sizes: 0.023-in. (0.6mm) – 0.030-in. (0.9mm) MIG wire or .030-in. Flux Cored wire
  • Welding Wire Spool: 4-in. Spool
  • Maximum Welding Thickness
  • Steel: 1/8-in.
  • Output Current Range: 120V: 30
  • 90 Amps
  • Power: IGBT Inverter
  • Spool Gun Capable: No, a spool gun cannot be connected to this unit.
  • Weight: 14.52 lbs (6.6 kg)
  • Overall Dimensions: 10.75-in. X 5.50-in. X 10.75-in.