Eastwood 58878 Features:

Why Do You Need a Tungsten Grinder? A Properly Sharpened Tungsten Will: Increase arc control Increase arc stability Eliminate porosity with contaminated tungsten electrodes Eliminate arc wander on outside corners Create better looking, stronger and better penetrating welds with consistent and accurate tungsten prepared points This Eastwood Cordless Tungsten Grinder features a long-lasting, double-sided, Diamond Grinding Wheel capable of providing over 200 tungsten sharpenings per wheel. Since it's cordless and portable, you can keep it with you wherever you're TIG welding and always have a perfectly ground tungsten for the best welds. The increased portability of the new Elite TG2000 Cordless Eastwood Tungsten Grinder eliminates getting out of position to go to your bench grinder, making it perfect when you're under a car or in tight spaces like welding around a roll cage. The small handheld unit is right by your side wherever you are welding. The Eastwood tungsten grinder also has engineered œslots that are designed to hold both 1/16 and 3/32 tungsten at the exact 10 or 22.5 degree angle for re-sharpening, assuring the perfect point every time! Simply remove the tungsten, place in the design slots and sharpen- its that easy. Must Have Tool If You Own A TIG Welder If you own a TIG welder you need this tool. Increase arc control, increase arc stability, eliminate porosity with contaminated tungsten electrodes, eliminate arc wander on outside corners, create better looking, stronger and better penetrating welds with consistent and accurate tungsten prepared points. Easy to Use and Sharpens Over 200 Tungstens Per Diamond Wheel Works with all color tungstens Works with 1/16 and 3/32 tungstens Grinds 10° and 22.5° angles Designed to create the optimum rpm for the diamond sharpening wheel Diamond wheel is double sided for long life Sharpen over 200 tungstens per wheel (100 each side) 12 Volt, 2 Amp Motor to last for years of service Cordless for increased portability and ease of use wherever you are TIG welding Save Time and Money This convenient tool will save you a lot of time. You will no longer need to stop your welding project to get up and go to your bench grinder to sharpen your tungsten. Now you have the tungsten sharpener right there at the job, and time is money. Mark Winchester, Winchester Metal Works œA good weld starts with good tungsten prepœ

• Collet Size: 1/8"
• Spindle Lock: Yes
• Shaft Support: Sealed Deep Groove Ball Bearing
• Certification: ETL
• No-Load Speed: 8,000-35,000 RPM (Variable Speed)
• Diamond Wheel Diameter: 1”
• Sharpens Tungsten Sizes: 1/16" and 3/32"
• Grind Angles: 10° and 22.5°
• Grinding Wheel Type: Two Sided Diamond and Nickel Coated Carbon Steel
• Tool Construction: Steel with Silver and Chrome Plated Finish
• Slot to Break Off Tungsten: Yes
• Battery: 12 VDC Li-Ion / 2000 mAh, Rechargeable, UL Listed
• No Load Runtime: 20 Minutes
• Charging: 5 LED Status Bar
• Charge Time: 2-3 Hours
• Charge While In Operation: Yes
• Charger Wall Adapter: 13.5 VDC, 1500 mA Output 120VAC
• Note: You cannot buy the head unit to put on a Dremel®