Made in USA
35813 Pro-Flo 4 XT EFI System 1986 & Earlier Small Block Chevy [Black]
InfoVehicle Info Needed
EDELBROCKPART NUMBER: 350-35813

35813 Pro-Flo 4 XT EFI System 1986 & Earlier Small Block Chevy [Black]

$2,67695
ShippingShips Tomorrow
Lowest PriceLowest Price Guarantee

Small Block Chevy
Pro-Flo 4 XT EFI System
  • 1986 & Earlier Small Block Chevy
  • Pro-Flo 4 XT Intake Manifold
  • 90 mm Throttle Body
  • 35 lbs./hr. Injectors
  • Capable of 550 HP
  • Black Finish

    Edelbrock 35813 Features:

    The Edelbrock Pro-Flo 4 XT EFI Kit #35813 for 1986-earlier Small-Block Chevrolet engines is a complete bolt-on electronic fuel injection system featuring a black powder-coated XT intake manifold with large plenum and long tapered runners that comes ready to run with high-flow injectors, fuel rails and 90mm throttle body preassembled for you at the Edelbrock factory. This kit is rated at a maximum 550 horsepower with 35 lb/hr injectors and includes all supporting sensors, a wide-band O2 sensor and wire harnesses. Also included is a single-connection distributor designed to work specifically with Pro-Flo 4 providing fully sequential port injection and infinite control over ignition and fuel events under all conditions. Key Pro-Flo 4 advancements are its Self-Calibrating Fuel Map Technology, Wide-Band O2 Closed Loop Mixture Control, and new low-profile ECU with faster processor and upgraded Bluetooth chip for reliable connectivity with the E-Tuner app. The E-Tuner includes a Setup Wizard to guide you through setup and provides fuel and spark adjustability for complete control over the system. Pro-Flo 4 EFI #35813 for the Small-Block Chevy requires no laptop tuning. Minimal setup and tuning adjustments are required with base calibrations provided in the software. The ECU is self-learning and will continually adjust the fuel injection calibration for maximum performance by maintaining a specified target air-fuel ratio as you drive. The E-Tuner provides the ability to fine-tune air-fuel ratios, ignition curve, idle speed, acceleration fuel, fans, rev-limiter and more. Multiple display s let you monitor engine performance in real-time from inside or outside of the vehicle while retaining the simplicity that Pro-Flo 4 systems are known for. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

    • Edelbrock Pro-Flo 4 XT EFI System #35813 with Black Finish for 1986-Earlier Small-Block Chevrolet engines is a complete bolt-on electronic fuel injection system featuring a black-finished XT intake manifold.

      Emissions Note:

      This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

      CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

    • Part TypeFuel Injection System
      BrandEDELBROCK
      Package Height10.31
      Package Width25.25
      Package Length30.19
      Weight42.0 PG
      Part CategoryPerformance Parts
      Wiring Harness IncludedYes
      Fuel Pump IncludedNo
      Intake MaterialAluminum
      Throttle Body IncludedYes
      QuantitySold as a kit
      Intake FinishBlack
      Injectors IncludedYes
      Tps Sensor IncludedYes
      Fuel Rails IncludedYes
      Intake Manifold IncludedYes
      Engine Make/SizeChevy Small Block
      Ecm IncludedYes
      Oxygen Sensor IncludedYes
      Injector Size (Lbs./Hr.)35
      Distributor IncludedYes
      Injection StyleThrottle body
      Part FitmentSemi Universal
      Iac Motor IncludedYes
      Airflow Rate (Cfm)1,000 cfm
      Map Sensor IncludedYes
      Vendor Part Number35813
      Package Qty1
      Package TypeEA
      No Questions
      No Reviews

      Items You Need

      2-Bar MAP Sensor for Pro-Flo 4 Boosted Applications

      EDELBROCK

      2-Bar MAP Sensor for Pro-Flo 4 Boosted Applications

      Part Number : 350-3542
      $10595
      Pro-Flo XT Fuel Injection System Ford 351W

      EDELBROCK

      Pro-Flo XT Fuel Injection System Ford 351W

      Part Number : 350-3547
      $10095
      Pro-Flo 350 Black Nylon Braided Hose [-8 AN, 10 ft]

      JEGS

      Pro-Flo 350 Black Nylon Braided Hose [-8 AN, 10 ft]

      Part Number : 555-110922
      $4799$51.79
      You Save$3.80
      AN Hose & Fitting Assembly Kit

      JEGS

      AN Hose & Fitting Assembly Kit

      Part Number : 555-28010
      $758$9.99
      You Save$2.41
      Hose/Cable Cutters [Overall Length: 24 in.]

      JEGS

      Hose/Cable Cutters [Overall Length: 24 in.]

      Part Number : 555-80586
      $4699$50.69
      You Save$3.70
      Nylon Vise Jaws 4 in. Wide for AN Hose Ends

      JEGS

      Nylon Vise Jaws 4 in. Wide for AN Hose Ends

      Part Number : 555-80544
      $2470$24.99
      You Save$0.29
      AN Hose Complete Pressure Test Kit [-3 AN to -16 AN]

      JEGS

      AN Hose Complete Pressure Test Kit [-3 AN to -16 AN]

      Part Number : 555-100285
      $9999$109.99
      You Save$10.00
      AN Wrench Set -4 AN to -12 AN Standard Wrenches

      JEGS

      AN Wrench Set -4 AN to -12 AN Standard Wrenches

      Part Number : 555-80558
      $6299$69.99
      You Save$7.00
      AN 90-Degree Max Flow Swivel Hose End [-8 AN Female to -8 AN Hose, Black]

      JEGS

      AN 90-Degree Max Flow Swivel Hose End [-8 AN Female to -8 AN Hose, Black]

      Part Number : 555-110022
      $1699$18.29
      You Save$1.30
      AN Male Straight Max Flow Swivel Hose End [-8 AN Male to -8 AN Hose, Black]

      JEGS

      AN Male Straight Max Flow Swivel Hose End [-8 AN Male to -8 AN Hose, Black]

      Part Number : 555-110092
      $1028$10.99
      You Save$0.71
      Thread Sealing Tape 1/2 in. x 43 ft.

      JEGS

      Thread Sealing Tape 1/2 in. x 43 ft.

      Part Number : 555-75055
      $319$3.99
      You Save$0.80
      Aluminum Vise Jaws 4 in. Wide for AN Hose Ends

      JEGS

      Aluminum Vise Jaws 4 in. Wide for AN Hose Ends

      Part Number : 555-80547
      $2470$24.99
      You Save$0.29
      Vise Jaw Protector for AN Hose Ends

      JEGS

      Vise Jaw Protector for AN Hose Ends

      Part Number : 555-80548
      $2276$29.99
      You Save$7.23
      Stainless Steel Cushion Clamps [Fits -8 AN Hose]

      JEGS

      Stainless Steel Cushion Clamps [Fits -8 AN Hose]

      Part Number : 555-82036
      $699$7.49
      You Save$0.50
      Fuel Stabilizer 15oz Bottle

      LUCAS OIL

      Fuel Stabilizer 15oz Bottle

      Part Number : 639-10302
      $1015$11.28
      You Save$1.13
      Some parts are not legal for use in California or other states with similar laws / regulations
      p65 warning
      Your Cart

      Your shopping cart is empty!