Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Chevy 262-400ci Small Block V8
- *USED - Performer Intake Manifold
- SB-Chevy 262-400ci 1955-86
- 4-bbl Spread-Bore Carb Flange (with EGR)
- Idle-5500 RPM Range
- Designed for street 1955-86 small block Chevy 262-400
- Port Exit Dimensions: 1.14" x 1.88"
- Manifold Height: (A) 3.50", (B) 4.60" Click here to determine carburetor pad height
- Recommended Intake Gasket: JEGS p/n 555-210001
- For:
- 1972-86 305, 350, and 400 with OE 4-bbl or Edelbrock Carburetor #350-1400
- 1981-86 GM corporate 350 engines
NOTE #350-2101 is for 302, 327, and 350 with OE 4-bbl or Edelbrock Carb #350-1400 on 1966-73 non-CA passenger cars & 1966-83 trucks/Suburbans except stock-equipped EGR- Fits 1987-Up stock aluminum heads (does not fit 1987-Up cast iron or Chevrolet Bow Tie heads)
- Accepts late model choke, water neck, AC, alternator, and HEI (provisions to add oil fill tube)
- Includes choke plate #350-8901
- Use EGR adapter #350-8035 to adapt clamp-on EGR valve
- Requires EGR spacer #350-1476 with use of carb #350-1400 (also required on centerbolt heads with 1986-Earlier bolt pattern)
Carb Recommendations/Notes
- OE 4-bbl Carburetor
- Can work with non-EGR system
- Provision for evaporative canister
- Factory cruise control accepted
- Uses automatic divorced choke rod #350-9171 and throttle bracket #350-8036 for 1972-78 vehicles
- Edelbrock 600 cfm Performer Carburetor #350-1400
- Provision for evaporative canister
- Factory cruise control accepted
- Uses throttle bracket #350-8036 for 1972-78 vehicles
- Edelbrock 600 cfm Performer Carburetor #350-1405
- Manual choke only
- Can work with non-EGR system
- Use stud, nut, and washer kit: JEGS 1-1/2' stud kit p/n 555-15840 or JEGS 2' stud kit p/n 555-15841
- Factory cruise control accepted
- Uses throttle bracket #350-8036 for 1972-78 vehicles
- Edelbrock 600 cfm Performer Carburetor #350-1406
- Can work with non-EGR system
- Factory cruise control accepted
- Uses throttle bracket #350-8036 for 1972-78 vehicles
- Edelbrock 650 cfm Thunder Series AVS Carburetor #350-1905
- Manual choke only
- Can work with non-EGR system
- Use stud, nut, and washer kit: JEGS 1-1/2' stud kit p/n 555-15840 or JEGS 2' stud kit p/n 555-15841
- Factory cruise control accepted
- Uses throttle bracket #350-8036 for 1972-78 vehicles
- Edelbrock 650 cfm Thunder Series AVS Carburetor #350-1906
- Can work with non-EGR system
- Factory cruise control accepted
- Uses throttle bracket #350-8036 for 1972-78 vehicles
- 1972-86 305, 350, and 400 with OE 4-bbl or Edelbrock Carburetor #350-1400
BrandEDELBROCK
Package Height5.8
Package Width11.1
Package Length22.1
Weight14.61 PG
Part CategoryPerformance Parts
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
){kind=link}