
Performer Hi-Torq Small Block Chevy 350ci / 363hp Crate Engine EPS Vortec Intake & Performer Series Carburetor
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Performer Hi-Torq 350ci / 363hp Engine
- 750 cfm Performer Series Carburetor
- Performer EPS Vortec Manifold
- E-Tec 170 Cylinder Heads
- Water Pump Not Included
- Satin Finish
- 363 HP and 405 ft/lbs. of Torque
- Performer EPS Intake Vortec
- Performer Series 750 cfm Carb
- Built Upon New GM Goodwrench Short Block
- Assembled w/ARP Bolts And MSD Billet Distributor
- Custom Assembled By Edelbrock Technicians
- Edelbrock E-Tec 170 Heads w/Guide Plates
- 24 Month/Unlimited Mileage Warranty
ENGINE OIL: The engine is supplied with Edelbrock Break-In Oil in the crate. Before starting the engine, you will need to prime the oil system. Do not turn the engine over with starter motor for priming. Mark the distributor, as it comes preset on #1 cylinder. Then, remove and use a priming tool to turn the pump shaft.
Change the engine oil no more than 300 miles after break-in. Use of oil with zinc or a zinc additive for the life of your engine is recommended.




![Break-In/Engine Oil Supplement [12 oz. Bottle]](https://www.jegs.com/images/mini_200/500/555/555-28060.jpg)

![Engine Load Leveler [1,250 lb.]](https://www.jegs.com/images/mini_200/500/555/555-80048.jpg)
![Engine Stand [1000 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80040.jpg)
![Engine Stand [1250 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80041.jpg)

![Rotating Engine Stand [1000 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80059.jpg)