Performer RPM Intake Manifold Used

Name: Performer RPM Intake Manifold Used
Brand: EDELBROCK
SKU: 350-7101U
Price: 199.99 USD
Availability: OutOfStock

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Chevy 262-400ci Small Block V8

Used
SB-Chevy 262-400ci 1955-86
4-bbl Square-Bore Carb Flange (non-EGR)
1500-6500 rpm

Designed for 1955-86 262-400ci Chevrolet V8s. Designed for maximum horsepower along with a broad torque curve for high-performance street/marine. Provides power like a single-plane and throttle response like a dual-plane. Has provisions to add oil fill tube. No provisions for exhaust heated or stock-style choke. Accepts late-model waterneck, air-conditioning, alternator and H.E.I. Will fit cast iron Chevrolet Bowtie heads but will not fit 1987 and later cast-iron heads. Will not fit under stock Vette hood.
Installation Notes:
Port exit dimensions: 1.16' x 1.92'
Manifold height: (A) 4.20' , (B) 5.25' (This intake is .700' taller than Performer intake p/n 350-2101.) Click here to determine carburetor pad height.
Recommended intake gasket; JEGS 555-210002
Use JEGS intake manifold bolt kit 555-83200
Carburetor Recommendations:
Edelbrock Performer 750cfm Carburetor p/n 350-1407
Edelbrock Performer 800cfm Carburetor p/n 350-1412
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.
carb will work with non-EGR system
carb has no provision for evaporative canister,
carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit
carb has manual choke only.
Edelbrock Performer 800cfm Carburetor p/n 350-1413
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.
carb will work with non-EGR system
carb has no provision for evaporative canister,
carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit.