EPAS Performance HEP1211 Hydroelectric Pump System Features:

• Works with an angle sensor and CAN protocol 
• No delay or pressure drop when giving input to the steering wheel
• An oil cooler may be added for a racing application 
• Wiring harness is plug-and-play, and only requires a hot ignition source with full battery power
• Amp draw is between 1Amp-45Amps (most of its time is in the lower range)
• Maximum unit pressure is 1900 PSI @ 55GPM
• 10 ft. long power cords
• The absolute maximum length of the pressure hose and return lines is 17 ft.

EPAS Performance HEP1211 Hydroelectric Pump System Note:

• We highly recommend the installation of this system be done by a professional mechanic or shop.