
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Tips for Use:
- Protect hands with chemical resistant gloves.
- Always test a small, discrete area to determine results.
- Mask off areas Safe-Erase should not contact.
- Apply a thin coat by brush, putty knife, roller, or conventional airless sprayer to remover 1-6 layers.
- Allow 1 hour up to overnight for multiple layers of paint to release and crinkle. As long as Safe-Erase is wet, it is working.
- Once the paint is loose, remove debris with a putty knife or nylon brush and wash the area with warm soapy water. There is no need to neutralize the treated surface.
- Once dry, the area can be re-painted.
- Do not use on plastics, rubber, vinyl, or linoleum. Safe-Erase will melt soft plastics and latex gloves.
- Safe-Erase can be used on wood, metal, and masonry surfaces.
Extra Environmental Info: Safe-Erase meets the consumer products LVP-VOC exemption criteria established by the California Air Resources Board (CARB) for consumer & institutional products & federal LVP-VOC exemption.
Remove Varnish and Paint Safely and Easily
Evapo-Rust's Safe-Erase Stripper is a powerful, vapor-free gel that clings to wood, metal, and masonry surfaces. Quickly dissolve multiple layers of paint or varnish by simply brushing on the gel and allowing a minimum on one hour for the paint to bubble up (multiple layers may take up to 24 hours), then just scrape it off.
