Tips for Use:

• Protect hands with chemical resistant gloves.
• Always test a small, discrete area to determine results.
• Mask off areas Safe-Erase should not contact.
• Apply a thin coat by brush, putty knife, roller, or conventional airless sprayer to remover 1-6 layers.
• Allow 1 hour up to overnight for multiple layers of paint to release and crinkle. As long as Safe-Erase is wet, it is working.
• Once the paint is loose, remove debris with a putty knife or nylon brush and wash the area with warm soapy water. There is no need to neutralize the treated surface.
• Once dry, the area can be re-painted.
• Do not use on plastics, rubber, vinyl, or linoleum. Safe-Erase will melt soft plastics and latex gloves.
• Safe-Erase can be used on wood, metal, and masonry surfaces.

Extra Environmental Info: Safe-Erase meets the consumer products LVP-VOC exemption criteria established by the California Air Resources Board (CARB) for consumer & institutional products & federal LVP-VOC exemption.