Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Replacement Anodes
- 2/pkg
- Electroplating at home is easier than you think when you use this Tin Zinc Electroplating System. The Eastwood Tin Zinc Electroplating System will bring back the original luster to properly prepared metal parts, while providing a corrosion resistant, protective plating similar to chrome but without the expense, hassles or hazards. You can plate practically any metal part right at home, including copper, brass, and steel (not for aluminum, die-cast, pot metal or stainless).
How it works: Make sure parts are thoroughly degreased and de-rusted before you start electroplating at home. Electroplating uses electrical current to pull small amounts of metal from the positively charged tin-zinc anode bar, through the electrolyte solution, and onto the negatively charged piece to be plated. Plating begins immediately once the piece is submerged into the solution. The longer the piece is submerged, the heavier the plating on the piece will be. You may remove the piece from the solution to check the progress and then re-submerge it for a thicker coating. The tin zinc electroplating process is complete when the piece is covered with a uniform dull gray film. Then polish to a beautiful shine.
Product LineEastwood Tin Zinc Electroplating System
BrandEXEDY CLUTCH
Package Height1.0
Package Width1.0
Package Length7.0
Weight0.23 PG
Vendor Part Number10049A
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
