Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Gator Guard II Liner Kit
- White
- 2 Part Epoxy
- Covers 32 Square Feet
At 72 degrees F surface will remain tacky for 7 hours. After 48 hours surface will have no product transfer and may be used for heavy loads. Do not wash surface with soap, water, or any other solvents for a minimum of 2 days after application.This coating is appropriate for all surfaces except polyethylene and similar plastics. Lightly scuff to roughen surface before coating. Make sure surface is free of any grease or oil. Mix equal parts of A and B thoroughly. Brush or roll mixed material at a 5-10 mil thickness. For spray application using a shutz type gun, apply a medium-wet coat at 35-65 psi. Immediately clean off any overspray and applicator with mineral spirits or paint thinner. Works best between 65 and 95 degrees F. One kit coats 32 square feet with a 5-10 mill coat.
BrandEXEDY CLUTCH
Package Height4.4
Package Width7.3
Package Length8.0
Weight5.15 PG
Vendor Part Number10429Z
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
![Industrial Nitrile Gloves [5.5 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1126.jpg)
JEGS
Industrial Nitrile Gloves [5.5 mils Thick, Medium]
Part Number : 555-1126
$1599$17.99
You Save$2.00
![Industrial Nitrile Gloves [5.5 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1127.jpg)
![Industrial Nitrile Gloves [5.5 mils Thick, X-Large]](https://www.jegs.com/images/mini_200/500/555/555-1128.jpg)
JEGS
Industrial Nitrile Gloves [5.5 mils Thick, X-Large]
Part Number : 555-1128
$1599$17.99
You Save$2.00
JEGS
Part Number : 555-1126
$1599$17.99
You Save$2.00
JEGS
Part Number : 555-1128
$1599$17.99
You Save$2.00
Some parts are not legal for use in California or other states with similar laws / regulations
