Includes:

• Eastwood 250 amp MultiProcess Welder
• ERGO24 MIG Torch 4.5m (15 feet)
• WP26V TIG Torch 4.5m (15 feet)
• 300 amp Electrode Holder 4.5m (15 feet)
• 300 amp Ground Cable 4.5m (15 feet)
• Adaptor Cord
• TIG consumables
• 0.030 and 0.035 MIG tips
• Gas Bottle chains
• Gas Hose
• Instruction Manual

Specifications:

• Power Voltage (V): 1 phase 240V+/-10%, 1 phase 120V+/-10%
• Frequency (Hz): 50/60
• No Load Voltage (V): 61
• Rated Input Current (Amps) 240V: MIG = 47.3, TIG = 35.7, ARC = 53.5
• Rated Input Current (Amps) 120V: MIG = 42, TIG = 31.2, ARC = 51.1
• Output Current Adjustment (Amps) 240V: MIG = 50-250, TIG = 15-250, ARC = 25-250
• Output Current Adjustment (Amps) 120V: MIG = 50-140, TIG = 15-140, ARC = 25-140
• Output Voltage (V) 240V: MIG = 16.5-26.5, TIG = 10.6-20, ARC = 21-30
• Output Voltage (V) 120V: MIG = 16.5-21, TIG = 10.6-15.6, ARC = 21-25.6
• Duty Cycle: 60% @ 250 aMPS
• Power Factor: 0.73
• Efficiency (%): 80
• Wire Feed Speed (in/min): 78-629
• Post Flow Time (seconds): 1.0+/-0.05
• Weight:150 lbs. (43.6kg)
• Dimensions: 36"x21"x31" (900mm x 765mm x 765mm)