Fabtech Motorsports K7009 Features:

Our Tundra systems feature extended length ductile iron steering knuckles that have been designed to operate within the factory steering geometry. This geometry provides proper turning radius with oversized tires and wheels. The factory lower control arms are relocated with high arched 1/4 thick steel crossmembers with an integrated differential skid plate for protection against offroad obstacles. The factory front sway bar is retained and utilizes sway bar drops. The Basic system features a heavy duty shock spacer system that retains the stock coilover shocks without disassembly for a factory like ride. This system utilizes a 3 block and u-bolt system for rear lift.

• Everything You Will Need To Lift Your Vehicle
• Utilizes The Stock Radius Arm
• Designed For The Budget Minded Enthusiast
• w/Performance Shocks; 6 in. Lift
• 6 in. Lift Use 35/12.50R18 Tire w/18x9 Wheel w/5.5 in. BS w/Minor Trim.~Incl. Coil Spacers/Crossmembers/Spindles/3 in. Blocks And U-Bolts~Skid Plate/Carrier Bearing Spacer/Bump Stop Mounts/Weld-In Plates~Sway Bar And Differential Drop Brackets/Impact Struts And Mounts~Rear Shocks/All Required Hardware
• Incl. Coil Spacers/Crossmembers/Spindles/3 in. Blocks And U-Bolts~Skid Plate/Carrier Bearing Spacer/Bump Stop Mounts/Weld-In Plates~Sway Bar And Differential Drop Brackets/Impact Struts And Mounts~Rear Shocks/All Required Hardware