Made in USA
Tailpipes Aluminized Steel 1964-1967 GM A-Body
InfoVehicle Info Needed
FLOWMASTERPART NUMBER: 389-15819

Tailpipes Aluminized Steel 1964-1967 GM A-Body

$25995
2 left in stock
ShippingShips Tomorrow
Lowest PriceLowest Price Guarantee

GM A-Body
Flowmaster Tailpipes
  • 1964-1967 GM A-Body
  • 3.0'' Diameter
  • Aluminized Steel
  • Sold in Pairs


    FLOWMASTER MUFFLERS 15819 Features:

    These Builder Series tailpipes are constructed from 3.00-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit behind the rear tire, similar to the stock tailpipes. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 943048 (Super 44 Series) or 53058 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
    • Exits Behind the Rear Tire for a Stock Style Appearance
    • Mandrel-bent for Maximum Performance
    • High Clearance around Rear Differential
    • Designed for Double Off-set Mufflers
    • 16 Gauge Aluminzed Steel Tubing
    • Does Not Include Hardware
    • 3-year Limited Warranty
  • Part TypeExhaust Tail Pipe
    BrandFLOWMASTER
    Package Height14.0
    Package Width14.5
    Package Length35.0
    Weight25.5 PG
    Part CategoryPerformance Parts
    Hardware IncludedNo
    Tubing FinishAluminized
    Tubing MaterialSteel
    Tubing Gauge16-gauge
    Pipe Bend TypeMandrel
    Main Piping Diameter3 in.
    Welded HangerNo
    Inlet Outside Diameter3.125 in.
    Inlet Diameter3 in.
    Clamps IncludedNo
    Welded Bracket Quantity0
    Tapered OutletNo
    FinishAluminized
    Outlet Outside Diameter3.125 in.
    Exit StyleDual Rear Exit
    Universal Or Specific FitSpecific Fit
    PositionN/A
    Outlet Diameter3 in.
    ColorGray
    System TypeTailpipe Kit
    QuantitySold as a pair
    Overall Length35 in.
    MaterialAluminized Steel
    Outlet Inside Diameter3 in.
    Inlet Inside Diameter3 in.
    Flanged InletNo
    Tubing Diameter3 in.
    FitmentDirect Fit
    Part FitmentSemi Universal
    Outside Diameter3 in (76.2 mm)
    Vendor Part Number15819
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

    JEGS

    Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

    Part Number : 555-30722
    $969$10.99
    You Save$1.30
    Sure Seal 2-1/2" Clamp Fits 2.580" to 2.780"

    JEGS

    Sure Seal 2-1/2" Clamp Fits 2.580" to 2.780"

    Part Number : 555-30802
    $1799$19.99
    You Save$2.00
    3 Inch Exhaust Butt Joint Clamp

    JEGS

    3 Inch Exhaust Butt Joint Clamp

    Part Number : 555-30853
    $1199$12.89
    You Save$0.90
    Band Clamp Diameter: 2-1/2"

    BORLA

    Band Clamp Diameter: 2-1/2"

    Part Number : 157-18004
    $3499

    ITEM YOU MAY ALSO CONSIDER

    Header-Back Exhaust Pipe Kit 1964-1967 GM A-Body V8

    FLOWMASTER

    Header-Back Exhaust Pipe Kit 1964-1967 GM A-Body V8

    Part Number : 389-1041
    $58495
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!