
FLOWMASTERPART NUMBER: 389-717941
717941 FlowFX Direct Fit Muffler Exhaust System Fits Select RAM 2500/3500 6.4L Gas Engines
$38295$425.95You Save$43.00
6 left in stockItems You Need
Center In / Center Out: Oval
FlowFX Direct Fit Muffler Exhaust SystemSelect RAM 2500/3500 6.4L Gas Engines Moderate Sound Center In/Center Out: 3.500 in./3.500 in. Body Length: 10.750 in. Overall Length: 42.400 in. 409 Stainless Steel Brushed/Natural Finish
Flowmaster 717941 Features:
- Includes complete hardware, 3.5 in. Band Clamp
- FlowFX “straight-through” muffler design delivers a deep performance sound while eliminating drone
- Retains factory tailpipe, connects to existing system for an upgrade without full replacement
- Gains up to 13 Horsepower (HP) and 11 ft.-lbs. Torque (TQ) measured at the rear wheels
- Uses all stock hanger locations and ties in with factory exhaust hangers
- Backed by Flowmaster's Lifetime Limited Warranty
Quality Performance Mufflers - Economical Price!
Flowmaster FlowFX Series Stainless Steel Mufflers have a straight-through perforated core design that improves the horsepower output of your engine. FlowFX mufflers are built to last and deliver a deep mellow sound level that is different from Flowmaster's traditional "chambered" sound tone. With a compact, reversible design, FlowFX stainless steel mufflers fit in tight spaces and are easily installed in either direction to meet your vehicle's offsets.
Part TypeMuffler
Product LineFlowmaster FlowFX Series Stainless Steel Mufflers
BrandFLOWMASTER
Package Height8.37
Package Width10.5
Package Length13.5
Weight24.0 PG
Part CategoryPerformance Parts
Outlet Quantity1
Inlet LocationCenter
Valve IncludedNo
Muffler TypeAbsorption
Pipe Material409 Stainless Steel
Hangers IncludedYes
Inlet TypeSlip-Fit
Exit PositionOEM
Heat Shield AttachedNo
Muffler FinishBrushed
Mount TypeUses Factory Hangers
Body Length10.75 in.
Inlet Outside Diameter3.63 in.
Inlet Diameter3.5 in (88.9 mm)
Clamps IncludedYes
Inlet Quantity1
Case MaterialStainless steel
Product Width8 in. (203.2 mm)
Sound LevelModerate
FinishNatural
Outlet Outside Diameter3.50 in.
Exit StyleOEM
Muffler Material409 Stainless Steel
Gasket Or Seal IncludedNo
Outlet Diameter3.5 in (88.9 mm)
Muffler ShapeOval
ColorNatural
System TypeDirect-fit Muffler
Muffler SeriesFlow FX
Overall Length42.40 in.
Material409 Stainless Steel
Muffler Quantity1
Case ShapeOval
Body Width8 in.
Outlet Inside Diameter3.37 in.
Body Material409 Stainless Steel
Inlet Inside Diameter3.50 in.
Outlet LocationCenter
Valve TypeNot Applicable
Exit QuantityOne
Body Height5.00
Outlet TypeSlip-Fit
Part FitmentDirect Fit
Heat Shield IncludedNo
Vendor Part Number717941
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations



![Cut-Off Wheels [3 in. Diameter, Set of 4]](https://www.jegs.com/images/mini_200/500/555/555-m580c.jpg)

![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)


![Flow FX Direct Fit Muffler for 2017-2026 Ford F-250 Super Duty, F-350 Super Duty 6.2L, 7.3L, 6.8L [409 Stainless Steel]](https://www.jegs.com/images/mini_200/300/389/389-718102.jpg)


![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)
