
![Harmonic Balancer for 1989-1994 Nissan Skyline R32 GT-R RB26DETT [6.125 in. OD, Internal Balance]](https://www.jegs.com/images/mini_750/300/388/388-610901.jpg)
FLUIDAMPRPART NUMBER: 388-610901
Harmonic Balancer for 1989-1994 Nissan Skyline R32 GT-R RB26DETT [6.125 in. OD, Internal Balance]
$48292
Performance Harmonic Balancer1989-1994 Nissan Skyline BNR32 GT-R RB26DETT Phase 1 6.125 in. Outside Diameter Triple 4-Groove Serpentine Pulley Single 5 mm Keyway SFI 18.1 Certified Steel Black Zinc Finish Sold Individually
Power adders, cams and higher RPM change how a RB26DETT crankshaft vibrates, and the stock elastomer damper was only tuned for the engine as delivered. This Fluidampr viscous damper controls torsional vibration across the entire RPM range, so it keeps protecting the crank however the build evolves.
Fluidampr 610901 Harmonic Balancer Features:
- Fits 1989-1994 Nissan Skyline BNR32 GT-R with the Phase 1 RB26DETT engine
- 6.125 in. outside diameter, 3.131 in. depth, 1.180 in. bore
- Serpentine pulley with 4 rear, 4 middle and 4 front grooves
- Single 5 mm keyway
- 7 engraved timing marks, 5 degrees apart
- Internally balanced
- Black zinc damper with black hard coat anodized pulley
- 11 lbs total weight, 7.3 lbs rotating weight
- Viscous silicone design controls torsional vibration across the entire RPM range
- Helps reduce wear on critical engine parts and the risk of crankshaft failure
- Can free up torque and horsepower lost to crankshaft vibration
- Precision CNC-machined and balanced components
- No maintenance required
- SFI 18.1 certified
Part TypeHarmonic Balancer
BrandFLUIDAMPR
Package Height4.7
Package Width10.4
Package Length10.6
Weight11.46 PG
Weight11 lbs
Part CategoryPerformance Parts
Degree MarkingsEngraved
Bolt And Washer IncludedNo
Pulley FinishBlack Hard Coat Anodized
Mounting Hole Quantity1
QuantitySold Individually
MaterialSteel
Keyway TypeSingle (5 mm)
Engine BalanceInternal
Depth3.131 in
Drive Belt TypeSerpentine
Inside Diameter1.180 in
Degree Marking Range7 Marks, 5 Degrees Apart
Part FitmentSemi Universal
Outside Diameter6.125 in
Safety RatingSFI 18.1
Pulley Groove Quantity4 Rear, 4 Middle, 4 Front
FinishBlack Zinc
Rotating Weight7.300 lbs
Vendor Part Number610901
Package Qty1
Package TypeEA
Items You Need
Some parts are not legal for use in California or other states with similar laws / regulations

![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![Reversible Air Impact Wrench [1/2 in. Drive, 1000 ft.-lbs. Torque]](https://www.jegs.com/images/mini_200/500/555/555-81130.jpg)


![Standard Inductive Timing Light [12 Volt]](https://www.jegs.com/images/mini_200/500/555/555-40752.jpg)
![Brake Parts Cleaner [14 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/500/555/555-72311.jpg)
![3/8 in. Drive Metric Socket Set [10-Piece, 6-Point]](https://www.jegs.com/images/mini_200/500/555/555-w38202.jpg)


![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)
![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)
