Engine Specifications

• Horsepower: 655 hp
• Torque: 710 ft.-lbs.
• Compression: 10.0:1
• Fuel: Premium Unleaded

Block Information:

• Ford Performance A460 block
• Bore: 4.500 in.
• Stroke: 4.500 in.
• Displacement: 572 ci

Rotating Assembly:

• Crankshaft: Scat forged steel
• Balance: Internal balance
• Rods: Scat forged steel H-beam with ARP bolts
• Compression Ratio: 10:1
• Pistons: Diamond Racing

Camshaft Specs:

• Camshaft: Hydraulic roller
• Cam Duration @ .050 in.: Intake 259 / Exhaust 263
• Cam Lift: Intake .649 in. /Exhaust 649 in.
• Timing Chain: Double roller multi-index

Cylinder Head Information:

• Cylinder Heads: Super Cobra Jet aluminum
• Combustion Chamber: 72cc
• Valve Size: 2.200 in. Intake / 1.76 in. Exhaust (stainless steel valves)
• Rocker Arms: Crower stainless steel roller rockers

Oil Pan Information:

• Oil Pan: Ford Performance front sump
• Oil Pump: Jon Kaase heavy-duty aluminum body

Complete Engine Includes

• Edelbrock Victor intake manifold
• Ford Performance SFI approved damper 
• Holley Street Avenger 870 cfm carburetor
• MSD distributor
• Edelbrock water pump
• Spark Plug Wires
• Spark Plugs

Engine Break-In Procedure

Fill the engine with 5W50 full synthetic engine oil. For the first 500 miles of operation do not drive for long periods at any single speed, always vary your speed. Do not tow a trailer or put other heavy loads on the vehicle. Check the engine oil and coolant levels daily. At 500 Miles change the engine oil and filter. Check fuel and ignition settings; adjust valves (where applicable).

Engine type: 385 Series Big Block; Displacement 572 cu. In.; 4.50 in. bore x 4.50 in. Stroke; Ford Performance A460 Big Block M-6010-A460; SCAT Forged Steel Crankshaft; SCAT Forged Steel h-beam Connecting Rods and bolts; Diamond Racing Pistons w/floating wrist pins; Hydraulic roller Camshaft w/0.649 in. lift/Intake 259 Deg. at 0.050 in. Lift/Exhaust 263 Deb. at 0.050 in. Lift; Ford Performance Super Cobra Jet Aluminum Cylinder Heads M-6049-SCJA/Dual Valve Springs w/Damper/Stainless Steel 2.200 in. Intake Valves/Stainless Steel 1.76 in. Exhaust Valves; 10.0:1 Compression Ratio; Premium Unleaded Required Fuel; Crowner Stainless Steel Roller Rockers; Ford Performance Multi Index Timing Chain Set M-6268-A460; Heavy duty aluminum body Jon Kaase(R) oil pump; Ford Performance SFI approved Vibration Damper M-6316-A521; Ford Performance Front Sump Oil Pan M-6675-FT460; Edelbrock(R) Victor(R) 2966 Intake Manifold; Holley(R) Street Avenger 870 cfm Carburetor; MSD(R) distributor; High Performance Edelbrock(R) water pump; Ford Performance Blue 9mm spark plug wires M-12259-C460;