Made in USA
HANDLING PACK ADJ ASSY MGT 2005-14
Product Discontinued
FORD PERFORMANCEPART NUMBER: 397-M-FR3A-MGTAA

HANDLING PACK ADJ ASSY MGT 2005-14

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

    HANDLING PACK ADJ ASSY MGT 2005-14

  • Improves Handling
  • Gives Vehicle Sporty Appearance

    Ford Racing Mustang Coupe assembled handling packs are designed to lower your Mustang Coupe and put a little "road race" into your ride! These handling packs improve your handling without sacrificing ride quality. Pre-assembled struts, rear shocks, lowering springs, upgraded strut mounts, and jounce stops, along with a sway bar kit and an adjustable rear panhard bar, are carefully selected to work together for amazing performance. Ford Racing assembled handling packs bolt right into your Mustang GT Coupe with no spring compressor required!

  • Improves Handling
  • Gives Vehicle Sporty Appearance
Part TypeSuspension Kit
BrandFORD PERFORMANCE
Package Height18.3
Package Width25.0
Package Length65.0
Weight161.0 PG
Part CategoryPerformance Parts
Front Shock TypeGas-charged monotube
Rear Sway Bar Diameter0.866 in (22 mm)
Bushing ColorRed
Rear Sway Bar TypeSolid
Front Sway Bar Diameter1.378 in (35.001 mm)
Front Sway Bar TypeSolid
Rear Shocks/Struts IncludedYes
End Link Bushings IncludedYes
Center Link IncludedNo
Rear Coil Springs IncludedYes
Front Coil Springs IncludedYes
Upper Trailing Arms IncludedNo
Inner Tie Rod Ends IncludedNo
Front Sway Bar Diameter (Mm)35
Calipers IncludedNo
Upper Control Arms IncludedNo
Subframe Connectors IncludedNo
Panhard Bar IncludedYes
Front Sway Bar IncludedYes
Bushing MaterialPolyurethane
Lower Control Arms IncludedNo
Brake Pads IncludedNo
Tie Rod Sleeves IncludedNo
Wheel Studs IncludedNo
Chassis Stiffener IncludedNo
QuantitySold as a kit
Mounting Hardware IncludedYes
Front Shocks/Struts IncludedYes
Trailing Arm Mount Braces IncludedNo
Torque Arm IncludedNo
Lower Trailing Arms IncludedNo
Rear Strut Tower Bar IncludedNo
Outer Tie Rod Ends IncludedNo
Rotors IncludedNo
Rear Leaf Springs IncludedNo
Spindles IncludedNo
Front Strut Tower Bar IncludedNo
Rear Sway Bar FinishBlack powdercoated
K-Member Support Brace IncludedNo
Sway Bar Bushings IncludedYes
Brake Lines IncludedNo
Rear Sway Bar IncludedYes
Rear Sway Bar Diameter (Mm)22
Rear Shock TypeGas-charged monotube
Front Sway Bar FinishBlack powdercoated
Rear Leaf Spring Bushings IncludedNo
Vendor Part NumberM-FR3A-MGTAA
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
p65 warning
Your Cart

Your shopping cart is empty!