![Micro-V Serpentine Belt for Select 1988-2025 Freightliner, Kenworth and Other Makes [8-Rib, 83.159 in. Outside Circumference]](https://www.jegs.com/images/mini_750/400/465/465-k080825.jpg)
GATESPART NUMBER: 465-K080825
Micro-V Serpentine Belt for Select 1988-2025 Freightliner, Kenworth and Other Makes [8-Rib, 83.159 in. Outside Circumference]
$7084
EPDM Serpentine Belt for Accessory DrivesSelect 1988-2025 Freightliner, Kenworth and Other Makes See Fitment Tab for All Applications K Section 8 Ribs 83.159 in. Outside Circumference 1.087 in. Top Width Sold Individually
Gates Micro-V serpentine belts use an EPDM rubber compound that resists cracking, glazing and wear over a long service life. The rib profile flexes easily around small pulleys and runs quietly while carrying the full load of the accessory drive.
Gates K080825 Micro-V Serpentine Belt Features:
- EPDM Construction Resists Cracking, Glazing and Wear
- Rib Profile Flexes Around Small Pulleys
- Runs Quietly with Consistent Grip
- Cross Section: K
- Rib Count: 8
- Outside Circumference: 83.159 in.
- Top Width: 1.087 in.
- OE Rating: OE Performance
- Sold Individually
Vehicle Applications:
- 2003-2005 Freightliner MT45 4.3L L4, 5.9L L6, 6.7L L6
- 2005 Freightliner XC 5.9L L6
- 2005 Freightliner XC Raised Rail 5.9L L6
- 2005 Freightliner XC Straight Rail 5.9L L6
- 2006-2009 Freightliner M2 4.3L L4, 4.8L L4, 6.4L L6, 7.2L L6, 12.8L L6
- 2006-2009 Freightliner M2 100 4.3L L4
- 2006-2007 Freightliner M2 106 6.4L L6, 7.2L L6
- 2006-2007 Freightliner MT55 4.3L L4, 5.9L L6
- 2007 Freightliner MT45 4.3L L4, 5.9L L6, 6.7L L6
- 2009 Freightliner M2 106 6.4L L6, 7.2L L6
- 2011-2013 Freightliner M2 4.3L L4, 4.8L L4, 6.4L L6, 7.2L L6, 12.8L L6
- 2011-2013 Freightliner M2 106 6.4L L6, 7.2L L6
- 2011 Freightliner Sport Chassis 12.8L L6
- 2012-2017 Freightliner M2 112 8.9L L6
- 2015 Freightliner M2 4.3L L4, 4.8L L4, 6.4L L6, 7.2L L6, 12.8L L6
- 2015 Freightliner M2 106 6.4L L6, 7.2L L6
- 2020-2025 Freightliner M2 112 8.9L L6
- 2020 IC Corporation CE School Bus 6.7L L6
- 2005-2008 International 4300 6.7L L6, 7.6L L6
- 2005-2008 International 4300LP 6.7L L6, 7.6L L6
- 2005-2009 International 4400 7.6L L6
- 2005-2009 International 4400LP 7.6L L6
- 2014-2015 International 8600 TranStar 8.9L L6
- 2019 International 4300 6.7L L6, 7.6L L6
- 2019 International 4300LP 6.7L L6, 7.6L L6
- 2019 International MV607 6.7L L6
- 1988-1989 Kenworth 13-210 8.3L L6
- 1989 Kenworth 22-210 8.3L L6
- 1996-1999 Kenworth T600A 10.3L L6, 12.0L
- 1996-2002 Kenworth T800 10.3L L6, 12.0L
- 2010-2022 Kenworth T270 6.7L L6
- 2010-2020 Kenworth T370 6.7L L6
- 2015-2016 Kenworth T170 6.7L L6
- 2016 Kenworth K270 6.7L L6
- 2016 Kenworth K370 6.7L L6
- 2020 Kenworth T170 6.7L L6
- 2011-2014 Peterbilt 325 6.7L L6
- 2011-2012 Peterbilt 330 6.7L L6
- 2011-2022 Peterbilt 337 6.7L L6
- 2014-2018 Peterbilt 330 6.7L L6
- 2021-2022 Peterbilt 330 6.7L L6
- 2004 Sterling Truck L8500 6.4L L6, 8.8L L6
- 2004 Sterling Truck L9500 8.8L L6
- 2004 Sterling Truck LT7500 6.4L L6, 8.8L L6
- 2004 Sterling Truck LT8500 6.4L L6, 8.8L L6
- 2004 Sterling Truck LT9500 8.8L L6
- 2006-2007 Sterling Truck Acterra 6.4L L6, 7.2L L6
- 2006-2007 Sterling Truck Acterra 5500 6.4L L6
- 2006-2007 Sterling Truck Acterra 6500 6.4L L6
- 2006-2007 Sterling Truck Acterra 7500 6.4L L6
- 2006-2007 Sterling Truck L7500 6.4L L6
- 2006-2007 Sterling Truck L8500 6.4L L6, 8.8L L6
- 2006-2007 Sterling Truck LT7500 6.4L L6, 8.8L L6
- 2006-2007 Sterling Truck LT8500 6.4L L6, 8.8L L6
- Gates Micro-V Belts feature an exclusive truncated rib profile that makes it more flexible than a conventional V-ribbed belt, especially on extra-high speed, small-diameter sheave drives. Also, the shortened rib profile keeps the multi-ribbed belt from bottoming out in sheaves, helps it tolerate debris in sheave grooves, and reduces heat build-up. The belt is ideally suited for most multi-shaft, serpentine, backside idler and V-flat drives.
Part TypeSerpentine Belt
Product LineGates 8-Rib Micro-V and V-Ribbed Belts
BrandGATES
Package Height1.0
Package Width4.4
Package Length13.6
Weight0.65 PG
Part CategoryReplacement Parts
Number Of Ribs8
Top Width (In)1.087
Top Width (Mm)28
Oe Comparison RatingOE Performance
PositionVarious - Application Specific
Outside Circumference (In)83.159
Part FitmentDirect Fit
SectionK
Outside Circumference (Mm)2112
Vendor Part NumberK080825
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations