

E41 ECM Upgrade Kit for 2017-2023 Silverado, Sierra 2500 HD, 3500 HD 6.6L Duramax ECM-00-L5P-K
Reprogramming a Duramax L5P or L5D ECM traditionally means pulling the module from the truck, but the HP Tuners ECM-00-L5P-K kit works around that by modifying the E41 ECM through a dedicated upgrade harness while it stays mounted in the vehicle. The physical upgrade takes about 20 minutes and prepares the ECM for full read, edit, and write access in VCM Suite without an IMMO relearn, crank relearn, or Replace ECM procedure.
HP Tuners ECM-00-L5P-K Technical Specifications:
- Upgrades the GM E41 ECM used on 2017-2023 L5P and L5D 6.6L Duramax applications without removing it from the truck.
- Completes the physical upgrade in roughly 20 minutes using the supplied upgrade cable with an MPVI2+ (Pro Feature Set) or MPVI3 device.
- Avoids IMMO relearn, crank relearn, and Replace ECM procedures after the upgrade is complete.
- Delivers full scan, data log, read, edit, and write access through VCM Suite, with write times of approximately 6 minutes.
A VCM Suite-compliant computer running the latest VCM Suite BETA software, along with an MPVI2+ or MPVI3 device, is required to perform the upgrade and is not included with this kit.
Emissions Disclaimer
HP Tuners designs and manufactures software and hardware tools for vehicle diagnostics, scanning, logging, calibration, and data acquisition purposes. The authorized use of such tools is to bring a motor vehicle into emissions compliance and/or to maintain emissions compliance, as well as for use on competition/racing and other exempted vehicles. HP Tuners does not create or provide tunes or pre-made calibrations.
HP Tuners' Terms of Use, policies, and agreements mandate that users shall comply with all local, state, and federal laws. In using HP Tuners software and hardware tools, you are representing, warranting, and agreeing not to use, employ or allow any HP Tuners tools to operate as a defeat device or to violate emissions compliance in any manner whatsoever. You further represent warrant and agree that the HP Tuners tools shall only be used by manufacturers, calibration businesses, and professionals to develop emissions-compliant and/or exempted calibrations.
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART









![Under-Dash Creeper [40 in. Length]](https://www.jegs.com/images/mini_200/500/555/555-81153.jpg)



![Cobra Low-Profile Wire/Cable Ties [11 in. Black]](https://www.jegs.com/images/mini_200/500/555/555-10671.jpg)
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)

