The ICON Vehicle Dynamics K53242TS Stage 12 Suspension System is a complete suspension upgrade for the 2023-2026 Toyota Sequoia, providing 3-4.5 in. of lift. It replaces the factory shocks and related components with ICON's vehicle-specific parts, adding ride height while improving wheel travel, damping control and ride quality on and off the pavement.

ICON Vehicle Dynamics K53242TS Kit Highlights:

• Vehicle specific design for 2023-2026 Toyota Sequoia.
• 2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling.
• Adjustable front ride heights from 3-4.5 in. of front lift over stock.
• ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC).
• ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes.
• Tubular UCAs for added strength, durability, and alignment correction for better drivability.
• Included sway bar drop brackets reduce bind in OE sway bar links.
• Allows for full wheel travel without overstressing OE components.
• Tubular rear upper and lower links improve rear end articulation and allow for pinion angle adjustment.
• Dual rate rear coil springs improve performance and ride quality while providing 2 in. or 4 in. of rear lift, depending on the vehicle's stock suspension package.
• On-vehicle adjustable rear track bar properly centers rear axle while also improving rear suspension performance.
• 2.5 Aluminum Series rear remote reservoir shocks provide increased performance and balanced tune with coilovers.

ICON Vehicle Dynamics K53242TS Compatibility Notes:

• OEM Wheels & Tires Fitment: Yes.
• Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 in. w/5.75 in. Backspacing / 25mm Offset.
• Recommended Aftermarket Wheels: ICON Alloys - 18x9 in. w/6 in. Backspacing / 25mm Offset.
• Recommended Aftermarket Tires: 35 in. x 12.50 in. (Minor fender trimming and modifications may be required).
• Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
• Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.
• Tundra/Sequoia equipped with automatic leveling headlights or Load-Leveling Rear Height Control Air Suspension, part # 55153 is also required.
• Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.
• For 4WD models without TRD Off-Road package ICON recommends using ICON Diff Drop (Part# 55156) or using Toyota TRD axles (Part# 434200C020 Driver / 434100C020 Pass). Failure to do so could result in front axle damage. Not required for TRD Pro.
• Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.

ICON Vehicle Dynamics K53242TS Kit Contents:

• 22-26 TUNDRA/23-25 SEQUOIA 2.5 VS RR CDEV COILOVER KIT (58770E)
• 22-26 TUNDRA/23-25 SEQUOIA TUBULAR UCA DJ PRO KIT (58461DJ)
• 22-26 TUNDRA/23-25 SEQUOIA SWAY BAR DROP KIT (55154)
• 22-26 TUNDRA/23-25 SEQUOIA/24-25 TACOMA TUBULAR REAR LOWER LINK KIT (54002T)
• 22-26 TUNDRA/23-25 SEQUOIA/24-26 TACO/LC250/GX550/25-26 T4R TUBE UPR LINK KIT (54102T)
• 22-26 TUNDRA 0-1.5 in./23-25 SEQUOIA 0-4 in. REAR 2.5 VS CDEV RR PAIR (57840EP)
• 22-26 TUNDRA/23-25 SEQUOIA IIC INSTALL KIT (53508)
• 23-25 SEQUOIA TRD 2 in. DUAL RATE REAR SPRING KIT (51216)
• 22-26 TUNDRA/23-25 SEQUOIA/24-26 TACO/LC250/GX550/25-26 T4R BLT ADJ TRACK BAR (54202)