JEGS 555-44500K3 Hooligan RC Monster Truck Ready-to-Run Kit

Blaze new paths with the JEGS 555-44500K3 Ready-to-Run Hooligan RC 4x4 Monster Truck Kit. Complete with everything you need to hit the track, this truck will add a new element of fun to your RC experience.

The Hooligan makes use of its coil-over suspension, aggressive tread, and high ground clearance, to dominate any terrain it tackles. Looking beyond performance and handling, aesthetics make this monster truck as appealing a decoration as it is a formidable performer. From the wheels to the suspension components, the Hooligan has been designed with realism in mind. 

The included 6-cell nickel-metal hydride (NiMH) Small Block battery packs a punch and gives a reliable long-lasting performance. A drained battery won't spoil your fun with the 20-Watt PROSTOCK charger.

Special Note:

• JEGS RC Vehicles come set up for a LiPo Battery. When upgrading to a NiMH Battery you will need to adjust the pin location on your motor to the NiMH Battery setting during installation or serious damage may occur to your unit. See the Illustration in the images above for the correct pin adjustment.

To help make the Hooligan unique to you, JEGS offers many upgrades and accessories. See the links below for upgrade options including bead lock rings, wheelie bar, revised gearing, and ball bearing upgrades. Optional Parts List

JEGS RC Monster Truck Optional Parts CLICK HERE

JEGS RC Monster Truck Replacement Parts CLICK HERE

JEGS RC Batteries CLICK HERE

JEGS RC Battery Chargers CLICK HERE

JEGS RC Battery Charger Accessories CLICK HERE

JEGS 555-44500K3 Hooligan RC Monster Truck Ready-to-Run Kit Includes:

• (1) JEGS Hooligan Monster Truck [4WD, Solid Axle] - 555-44500
• (1) JEGS Small Block NiMH Battery [6-Cell] - 555-45070
• (1) JEGS PROSTOCK Charger [20W Sport Balance] - 555-45010

JEGS 555-44500K3 Hooligan RC Monster Truck Ready-to-Run Kit Features:

• Dimensions
  • Overall: 16 in. L x 12.200 in. W x 9.450 in. H 
  • Tires: 5.354 in. D x 2.913 in. W
  • Ground clearance: 3.140 in. 
  • Battery tray dimensions: 5.750 in. L x 2 in. W x 1 in. H
  • Wheels: 2.200 in. W (Dished)
• Weight: 4.850 lbs.
• Tires: Directional V-pattern
• Servo
  • Torque
    • 4.8V: 10.0 kg 138.8 oz./in.
    • 6V: 12.0 kg 166.7 oz./in.
  • Speed
    • 4.8V: 0.26 sec/60 degrees
    • 6V: 0.23 sec/60 degrees
  • Servo horn gear splines: 25 teeth
• ESC (Electronic Speed Control)
  • Waterproof (With the exception of prolonged submergence)
  • Dustproof
  • Built-in capacitor
  • Programmable with jumpers
• Drivetrain
  • Center shaft drivetrain (More efficient transfer of power)
  • Axle shafts: 5mm hardened steel
  • Gearbox:
    • 2-speed (High/low gears)
    • Changeable gearing
  • Sealed axle housings
  • Slipper clutch
  • Differential:
    
    • Front and rear planetary gears
    • Ring & pinion: 30T/15T
  • 4-link suspension designed to look realistic
• Chassis
  • Dual vertical plate layout
  • Sealed compartment for the receiver
  • Allen screw hardware is used throughout
  • Quick-release battery tray
  • Body posts are adjustable for different bodies
• Suspension
  • Shocks: (8) Oil-filled coil-overs (2 per corner)
    • Shock caps: Anodized aluminum
    • Shock body: 10 mm OD
    • Shaft: Hardened polished steel (3 mm OD)
    • Performance Spring Rate
    • Adjustable ride height
  • Axles: Solid front and rear (Realistic design)
  • Steering drag link: Hardened steel construction
  • Adjustments
    • Anti-squat (At 15-degree intervals)
    • Castor angle (At 15-degree intervals)
• Electronics
  • Servo: 12 kg
  • Electronic Safety Features
    • Over-heating prevention
    • Throttle signal loss protection
• Pistol-Grip Controller
  • Requires 4 AA Batteries Not Included 
  • Frequency: 2.4 GHz
  • Adjustments:
    • Security
      • Lock/unlock 
    • Steering
      • Servo reversal (Reverse steering control)
      • End-point (Increase or decrease maximum steering angle)
      • Digital trimming (Adjusts steering to neutral position when not moving)
      • Dual-rate (On-the-fly adjustments)
    • Throttle
      • Throttle reverse (Reverse controls)
      • End-point (Increase or decrease maximum throttle input)
      • Braking (Increase or decrease braking force)
      • Digital trimming (Adjust the throttle in the neutral position when not moving)

PROSTOCK Charger Features

• Batteries
  • 2S-4S (2-4 Cell) LiPo, LiHV, & LiFe
  • 4-7 Cell NiMH, & NiCd
• Max power output: 20 Watt
• Charge rate: Up to 3 Amp
• Quick-connect charge and balance ports
• Battery Plugs
  • XT60 charge port
  • EC3 plug adapter
• Power source: 100-240V AC

Small Block NiMH Battery Features

• Dimensions: 6.200 in. L x 1.830 in. W x 1 in. H
• Type: NiMH
• Cell Count: 6
• Volts: 7.2V
• Capacity: 3000 mAh
• Wire: 12 AWG
• Plug Type: UNI 2.0
• Adapter plugs
  • Deans (Red)
  • EC3 (Blue)