Performance Harmonic Balancer for 1992-1997 GM LT1 [SFI 18.1, 7.520 in., Steel, Internal Balance]
InfoVehicle Info Needed
JEGSPART NUMBER: 555-51605

Performance Harmonic Balancer for 1992-1997 GM LT1 [SFI 18.1, 7.520 in., Steel, Internal Balance]

$25499$274.99You Save$20.00
6 left in stock
ShippingShips Today
Lowest PriceLowest Price Guarantee

LT1 Harmonic Balancers/Dampers
Performance Harmonic Balancer
  • 1992-1997 GM LT1 Engines
  • Standard Pulley without Hub
  • 7.520 in. Diameter
  • SFI 18.1
  • Integral Damper/Pulley 6-Rib Design
  • Internal Balance

    JEGS 555-51605 Performance Harmonic Balancer Features:

    • Fits 1992-1997 GM LT1-Powered Camaro, Firebird, Corvette, and Caprice w/ 5.7L LT1 V8
    • 7.520 in. Outer Diameter; Internal Balance; Serpentine Drive Configuration
    • CNC-Machined AISI 1045 Forged Steel Hub Bonded to Steel Inertia Ring
    • Race Series High-Pressure, Low-Cure Natural Rubber Bonding Compound for Maximum Hub-to-Ring Retention
    • SFI 18.1 Approved; Tested Beyond 21,000 RPM Without Failure
    • Laser-Etched Timing Marks for Easy, Accurate Timing Adjustments
    • Lightweight All-Steel Construction; Only Marginally Heavier than Original Cast Iron Balancer
    • Sold Individually
    LT1 hub required when using our LT1 balancer P/N 555-51605/51606:
  • 555-51607 (1993-95 Camaro/Firebird | 1992-95 Corvette)
  • 555-51608 (1993-97 Caprice/Impala SS/Buick Roadmaster)
  • 555-51609 (1996-97 Camaro/Firebird | 1996 Corvette)

  • Hub does not include bolt or woodruff key
    • If you turn 12,500 RPM (on purpose or not), our high-performance balancers/dampers can handle it.

      We start with a chunk of 1045 steel, meticulously CNC machine it and fully balance it into harmonic art that meets SFI 18.1 specifications. That's good enough for pretty much every type of racing that there is. Permanently etched timing marks every 2-degrees with additional marks at 90° increments.

    Part TypeHarmonic Balancer
    Product LineJEGS SFI LT1/LS Harmonic Balancers/Dampers
    BrandJEGS
    Package Height3.8
    Package Width8.6
    Package Length9.3
    Weight9.8 PG
    Part CategoryPerformance Parts
    Degree MarkingsYes
    Harmonic Balancer ConstructionSteel
    Bolt Hole Count3
    Pulley DiameterN/A
    Engine BalanceInternal
    Overall Width1.33 in (33.8 mm)
    Degree Marking Range50 BTDC to 10 ATDC
    Harmonic Balancer MaterialSteel
    Crank Trigger/Exciter PlateNo
    Crank Bore1.63 in (41.402 mm)
    Part FitmentSemi Universal
    Ring Width (In)1.33
    Outside Diameter7.5 in (190.5 mm)
    Safety RatingSFI 18.1
    FinishBlack Painted
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    ITEM YOU MAY ALSO CONSIDER

    Powerforce+Plus Harmonic Damper Small Block Chevy LT1

    PROFESSIONAL PRODUCTS

    Powerforce+Plus Harmonic Damper Small Block Chevy LT1

    Part Number : 428-90030
    $23995
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning