This JEGS Universal Wishbone Rear Axle Locator is one of the most popular suspension add-ons for pro chassis builders. A wishbone locator will positively locate your rear axle housing on your chassis and keep it centered throughout the range of motion with little to no deflection our binding. Wishbones will not rob you of horsepower or E.T.’s. Some cutting may be needed for proper fitment. Welding is required.

JEGS Universal Wishbone Locator Includes:

• (2) Wishbone front tubes made from 1 in. O.D. x .156 in. wall thickness DOM tubing
• (2) Wishbone rear tubes made from 1 in. O.D. x .156 in. wall thickness DOM tubing
• (1) Inner slide tube made from 1 in. O.D. x .156 in. wall thickness DOM tubing
• (1) Outer slide tube made from 1 in. I.D. x .156 in. wall thickness DOM tubing
• (2) Axle tabs with 3/4 in. I.D. hole, made from 3/16 in. thick metal
• (4) Chassis tabs with 3/4 in. I.D. hole, made from 3/16 in. thick metal
• (12) 1/8 in.3-hole gussets
• (3) 3/4 in.-16 RH thread rod ends with jam nuts
• (3) 2.25 in. x 3/4 in.-16 thread grade 5 bolts with nylon locking nuts