JEGS 72330 Rust Preventative Coating is a high solids coating designed to stop rust and corrosion from spreading. This single-component coating protects the surface from water, salt, chemicals, and other corrosive contaminants and can be applied over properly prepared rust and dries to a flexible, non-porous surface that will not crack, chip, flake, or peel. For applications exposed to UV light, it must be top-coated with an industrial topcoat and is V.O.C. compliant in North America.

Technical Data Sheet (TDS) Click Here

Features of JEGS Rust Preventative:

• Can Be Brushed or Sprayed on Directly Over Properly Treated Rust
• Starves Rust from Moisture & Oxygen to Prevent Spreading
• Significantly Extends the Life of Rusted Metal
• Can Be Used as a Topcoat if Not Exposed to UV Rays
• Allows You to Apply Paint as a Topcoat Over Rusted Metal
• Can be recoated after 3-8 Hrs depending on temperature and humidity
• Can be Top Coated after 24 Hr Drying Time
• Rust Preventive Coating should not be applied when temperatures are below (50 degrees F/10 degrees C)
• For Best Results, it is Recommend to Apply this Coating at 72 degrees F or above

Note: Surfaces treated with JEGS Rust Preventative must be coated with an industrial topcoat for protection from UV light. It is recommended to read the Technical Data Sheet before applying this product. Click on the Blue Technical Data Sheet Link Above.