JEGS 78768

Over 50 years have passed since your GM A-body rolled off the assembly line. In that time, the elements have had a chance to take their toll, and one common spot is at the upper dash/lower windshield. Rather than patching a number of holes and thin spots, replace the entire assembly with a new panel from JEGS. Designed to OE standards, this piece makes use of heavy 16-gauge steel with an EDP-coating for rust protection.

Features

• Dimensions: 56 7/8 in. Width x 5 in. Depth x 3 1/2 in. Height

Note: Welding is required for the installation of this patch panel.

Special Note: Before packaging by our team of professionals, each panel sold by JEGS goes through a thorough inspection for flaws. It is not uncommon for sheet metal panels to have surface scratches, small dings, or other minor imperfections. These imperfections are not considered damage and will be worked out through the bodywork phase with various levels of sanding and priming. The EDP coating on each panel is used as a protectant during shipping and storage and is not intended to be a finish coat. Proper prepping and priming are required during the bodywork process to protect the metal surface.