JEGS 78769

Replace, rather than patch, rust damage caused by a leaking windshield seal with an upper dash/lower windshield patch panel. To address a common rot spot on 68-72 A-bodies, this piece runs the full length of the dash. Designed to OE standards, and making use of EDP-coating and heavy 16-gauge steel, this panel is meant to last. 

Features

• Dimensions: 57 3/8 in. Width x 11 5/8 in. Depth x 3 1/2 in. Height
• (2) Captive nuts on the dash side

Note: Welding is required to install this patch panel.

Special Note: Before packaging by our team of professionals, each panel sold by JEGS goes through a thorough inspection for flaws. It is not uncommon for sheet metal panels to have surface scratches, small dings, or other minor imperfections. These imperfections are not considered damage and will be worked out through the bodywork phase with various levels of sanding and priming. The EDP coating on each panel is used as a protectant during shipping and storage and is not intended to be a finish coat. Proper prepping and priming are required during the bodywork process to protect the metal surface.