The JEGS 555-80129 1.5-Ton Hydraulic Off-Road Floor Jack is built to lift Jeeps, trucks, and SUVs where a conventional low-profile shop jack is useless - on sand, gravel, dirt, and uneven trail surfaces. Aluminum side plates and side handle paired with steel structural components keep the jack near 52 lbs. while still carrying the full 1.5-ton (3,000 lb.) rated load, and the oversized wheels roll over loose ground instead of digging into it. The 37 1/2 in. handle gives you the leverage to raise a lifted rig quickly while keeping you clear of the vehicle, and the 5 in. minimum height slides under most skid plates and rock sliders. Whether it lives in your garage, your pit cart, or the bed of your trail rig, it is a jack you can actually use where you break down.

JEGS 555-80129 1.5-Ton Hydraulic Off-Road Floor Jack Features:

• Lightweight aluminum side plates combined with steel structural components for strength without the weight of a full steel jack
• Large 4-inch front wheels and 6-inch rear wheels move the jack easily across sand, gravel, and loose dirt
• Molded nylon wheels resist chipping and corrosion better than painted steel casters
• Long 37 1/2 in. handle provides the leverage needed to lift a loaded off-road vehicle and keeps you out from under the load
• Aluminum side handle makes the jack easy to carry and load into a truck bed, trailer, or cargo area
• Hydraulic ram delivers smooth, controlled lifting and lowering for any Jeep, truck, or SUV within the rated capacity
• Compact 23 1/4 in. by 12 5/8 in. footprint stores easily in a garage corner, race trailer, or cargo area

JEGS 555-80129 1.5-Ton Hydraulic Off-Road Floor Jack Technical Specifications:

• Lifting capacity: 1.5 ton (3,000 lbs.)
• Minimum lifting height: 5 in. (127 mm)
• Maximum lifting height: 28 7/8 in. (733 mm)
• Front wheel diameter: 4 in.
• Rear wheel diameter: 6 in.
• Handle length: 37 1/2 in.
• Overall length: 23 1/4 in.
• Overall width: 12 5/8 in.
• Net weight: 52.5 lbs. (23.8 kg)
• Shipping weight: 59.1 lbs. (26.8 kg)
• Construction: aluminum side plates and side handle, steel frame and lifting components
• Fluid type: hydraulic oil

JEGS 555-80129 1.5-Ton Hydraulic Off-Road Floor Jack Application and Safety Notes:

• Universal fitment for lifted Jeeps, pickups, SUVs, off-road race vehicles, and trail rigs
• The 5 in. minimum height clears most aftermarket rock sliders, skid plates, and oversized tires
• The 28 7/8 in. maximum lift is enough to raise a 35 in. or larger tire off the ground on a lifted chassis
• Position the jack on the vehicle manufacturer's designated lift points, or on a frame rail or axle tube on off-road applications
• On soft sand or mud, set the jack on a flat board or jack pad to spread the load and keep the base from sinking
• Never exceed the 3,000 lb. rated capacity, and always support the vehicle on jack stands rated for the load before working underneath; jack stands sold separately