Synthetic rope is the reason to step up to the JEGS 555-80377. Rated at 3,500 lb of single-line pull, this winch ships with 7/32 in. x 39 ft. of synthetic line rather than steel cable, so it stores far less energy if the line ever parts, it will not develop the sharp broken strands that make used wire rope dangerous to handle, and it is light enough to drag out to an anchor point by hand. Behind the drum sits a 1.2 HP permanent magnet 12-volt motor and a 153:1 differential planetary gearset, giving ATV, side-by-side and utility trailer owners real recovery capability in a package that still bolts to a standard winch mount.

JEGS 555-80377 3,500 lb Synthetic Rope Winch Features:

• Fits ATVs, UTVs, side-by-sides and utility trailers
• 3,500 lb rated single-line pull, rated on the first rope layer on the drum
• 1.2 HP permanent magnet 12V DC motor sized for intermittent recovery duty
• 153:1 differential planetary gearing keeps line speed manageable at full load
• Automatic spring brake holds the load in place when the winch stops pulling
• 7/32 in. x 39 ft. synthetic rope on a 2.26 in. x 2.87 in. drum is lighter, safer under load and easier to handle than wire cable
• Included hawse fairlead has a smooth, rounded rope opening that guides synthetic line onto the drum without the abrasion of steel rollers, and it keeps the rope aligned on angled pulls
• Free-spool clutch releases the drum so rope can be pulled out by hand to the anchor point
• Powered in and powered out operation reels the rope in or out under motor control, even under load
• Factory-sealed gear box is packed with high-temperature lithium grease and needs no added lubrication
• IP66 rated, dust-tight and resistant to powerful water jets
• 4-hole 4.87 in. x 3 in. mounting bolt pattern is the standard for this class of winch, so most common ATV and side-by-side mounting kits accept it
• Compact 11.8 in. L x 4.13 in. W x 4.13 in. H housing with a 20 lb net weight

JEGS 555-80377 3,500 lb Synthetic Rope Winch Notes:

• Mount on a flat surface so the motor, drum and gear housing stay in alignment and the rated load spreads evenly across the mount
• Control module is designed to be installed remotely rather than clamped to the winch body, away from spray and debris
• Requires a 12-volt vehicle electrical system; keep the engine running while winching to limit battery drain
• Snatch block and recovery shackles sold separately

JEGS 555-80377 3,500 lb Synthetic Rope Winch Includes:

• (1) 3,500 lb electric winch assembly with 7/32 in. x 39 ft. synthetic rope
• (1) Mounting plate
• (1) Hawse fairlead
• (2) Fairlead bolts, (2) nuts, (2) lock washers and (2) flat washers
• (1) Clevis hook
• (1) Hook strap
• (1) Wireless remote control
• (1) Wired controller with 9 ft. cable
• (1) Control module
• (1) Clutch knob
• (1) Red power wire
• (1) Black ground wire