Made in USA
Bucket Seat Foam Fits 1971-1981 Chevrolet Camaro & 1978-1981 Pontiac Firebird w/Standard Bucket Seat [With Wire]
Product Discontinued
JEGSPART NUMBER: 555-90582

Bucket Seat Foam Fits 1971-1981 Chevrolet Camaro & 1978-1981 Pontiac Firebird w/Standard Bucket Seat [With Wire]

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Seat Foam for Bucket Seats
GM Cars
Bucket Seat Foam
  • 1971-1981 Chevy Camaro (Except LT)
  • 1971-1981 Pontiac Firebird (Except Trans AM)
  • Standard Bucket Seat w/Wires
  • Full Seat Back and Bottom Cushion Set
  • Sold Individually

    JEGS 555-90582 Standard Bucket Seat Foam

    Restore your classic interior with JEGS 90582 Bucket Seat Foam, and regain the comfort of driving in a new seat. Our seat foam is designed for Chevy Camaros and Pontiac Firebirds to restore crushed, smelly, and time-worn seat cushions. Each seat foam comes with a molded-in steel listing wire that provides structural support to the side bolsters and makes upholstery installation easier.

    JEGS 555-90582 Standard Bucket Seat Foam Note:

    • This part does one (1) bucket seat, two (2) are needed per vehicle.
    • Will Not Fit Chevrolet Camaro LT Models or Pontiac Firebird Trans Am Models

  • Part TypeSeat Cushion Foam
    BrandJEGS
    Package Height14.0
    Package Width22.0
    Package Length23.5
    Weight13.5 PG
    Part CategoryReplacement Parts
    Vehicle MakeChevrolet/Pontiac
    Front Seat TypeBucket
    Part FitmentDirect Fit
    Vehicle ModelCamaro/Firebird
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    Items You Need

    Black Latch & Link Ultra Series Harness 4-Point Design

    JEGS

    Black Latch & Link Ultra Series Harness 4-Point Design

    Part Number : 555-70076
    $10999$118.99
    You Save$9.00
    2-Point Seat Belt Mounting Hardware [Bolt Size: 7/16 in.-20 x 1-1/2 in.]

    JEGS

    2-Point Seat Belt Mounting Hardware [Bolt Size: 7/16 in.-20 x 1-1/2 in.]

    Part Number : 555-70018
    $404$5.99
    You Save$1.95
    3-Point Seat Belt Mounting Hardware

    JEGS

    3-Point Seat Belt Mounting Hardware

    Part Number : 555-70019
    $2419$26.99
    You Save$2.80
    Angled Hog Ring Pliers

    JEGS

    Angled Hog Ring Pliers

    Part Number : 555-W88003
    $1699$18.99
    You Save$2.00
    Hog Rings [1000 Pieces w/Storage Case]

    JEGS

    Hog Rings [1000 Pieces w/Storage Case]

    Part Number : 555-W5230
    $1599$17.99
    You Save$2.00
    90 degree Seat Belt Mounting Bracket [2 in. Wide x 1.3125 in. Deep]

    JEGS

    90 degree Seat Belt Mounting Bracket [2 in. Wide x 1.3125 in. Deep]

    Part Number : 555-70015
    $1257$16.99
    You Save$4.42
    60 degree Seat Belt Mounting Bracket [2 in. Wide x 1.200 in. Deep]

    JEGS

    60 degree Seat Belt Mounting Bracket [2 in. Wide x 1.200 in. Deep]

    Part Number : 555-70016
    $1174$11.99
    You Save$0.25
    Seat Belt Backing Plate [4 in. x 4 in. x 1/8 in. with 1/2 in. Hole]

    JEGS

    Seat Belt Backing Plate [4 in. x 4 in. x 1/8 in. with 1/2 in. Hole]

    Part Number : 555-70017
    $503$5.99
    You Save$0.96
    Angled Flush Cutter - 5 in.

    JEGS

    Angled Flush Cutter - 5 in.

    Part Number : 555-W30763
    $1099$13.99
    You Save$3.00
    123-Piece Tool Set with Carry Case

    JEGS

    123-Piece Tool Set with Carry Case

    Part Number : 555-80427
    $3599$51.99
    You Save$16.00
    Socket Set, 3/8 in. & 1/4 in. Drive [SAE/Metric 52-Piece]

    JEGS

    Socket Set, 3/8 in. & 1/4 in. Drive [SAE/Metric 52-Piece]

    Part Number : 555-81565
    $1999$33.99
    You Save$14.00
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!