
JKS MANUFACTURINGPART NUMBER: 460-JSPEC113KFA
JSPEC113KFA J-Konnect 3.5" Lift Kit, 07-18 Jeep Wrangler JK 4-Door w/ Fox Adventure Series Shocks
$2,33162
Truck Freight
J-Konnect 3.5" Lift Kit07-18 Jeep Wrangler JK 4-Door Fox Adventure Series Shocks
JKS Manufacturing JSPEC113KFA Features:
For serious off-road use, step up to a JKS J-Konnect 3.5" suspension system for your Wrangler JK 4-Door. J-Konnect™ can tackle aggressive terrain including rocks and ruts without giving up street manners or breaking the bank. J-Konnect system takes suspension component strength and suspension geometry a step further by adding front and rear fixed-length J-Link lower control arms along with a drag link flip ki t and track bar braces. In addition to being significantly stronger than factory control arms, J-LINK lower control arms add front caster and rear wheelbase. Built from 2” x .250-wall DOM tubing, J-LINK control arms provide street-friendly NVH isolation with large factory style rubber bushings at both ends. The drag link flip kit flattens the steering angle to mimic factory angles, while the track bar adds strength and protection. Combined with the matched dual-rate coil springs, custom-valved FOX Adventure Series monotube gas shocks, an adjustable track bar, Quicker Disconnect sway bar end links, and more. J-Konnect™ is ready for aggressive trail performance. Get connected with J-Konnect.- Front/Rear Dual Rate Coil Springs designed for great ride quality and improved performance across any terrain
- Front/Rear FOX 2.0 Adventure Series IFP shocks specifically valved for this suspension system for improved performance on and off-road
- Front Adjustable Track Bar and Rear Track Bar Bracket to correct axle positioning under vehicle
- Front Sway Bar Quicker Disconnects and Brake Line Brackets to allow for increased offroad articulation
- Front/Rear J-Link Lower Control Arms for improved strength and caster correction
- Front/Rear Track Bar Support Braces to improve strength and protection
- HD Drag Link Flip Kit w/ Track Bar Bracket to improve steering angles for better handling
- Front/Rear Bump Stop Extensions to properly limit suspension up travel
JKS Manufacturing JSPEC113KFA Notes:
- J-Konnect: Builds on J-Venture with heavy-duty J-Link lower control arms to improve strength and correct geometry.
- Tire: 35x12.50; Wheel: 16x8, 17x9, 20x9; Backspacing: 4.5"; Other tire/wheel sizes can be used, however may require additional modifications.
Part TypeSuspension Lift Kit
BrandJKS MANUFACTURING
Package Width186.25
Weight186.25 PG
Part CategoryPerformance Parts
Part FitmentDirect Fit
Vendor Part NumberJSPEC113KFA
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations