Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededJKS MANUFACTURINGPART NUMBER: 460-JSPEC124KFP
JSPEC124KFP J-Konnect 3.5" Lift Kit, Jeep Wrangler JL 4-Door w/Fox 2.0 Performance Series Shocks, HD Rate Coils
$2,46131
Truck Freight
Ships on Sep 15, 2026
Lowest Price GuaranteeJ-Konnect 3.5" Lift KitJeep Wrangler JL 4-Door Fox 2.0 Performance Series Shocks HD Rate Coils
JKS Manufacturing JSPEC124KFP Features:
For serious off-road use, step up to a JKS J-Konnect 3.5" suspension system for your Wrangler JL 4-Door. J-Konnect™ can tackle aggressive terrain including rocks and ruts without giving up street manners or breaking the bank. J-Konnect system takes suspension component strength and suspension geometry a step further by adding front and rear fixed-length J-Link lower control arms along with a drag link flip ki t and track bar braces. In addition to being significantly stronger than factory control arms, J-LINK lower control arms add front caster and rear wheelbase. Built from 2” x .250-wall DOM tubing, J-LINK control arms provide street-friendly NVH isolation with large factory style rubber bushings at both ends. The drag link flip kit flattens the steering angle to mimic factory angles, while the track bar adds strength and protection. Combined with the matched dual-rate coil springs, custom-valved FOX 2.0 IFP Performance Series monotube gas shocks, an adjustable track bar, Quicker Disconnect swa y bar end links, and more. J-Konnect™ is ready for aggressive trail performance. Get connected with J-Konnect.- Front/Rear HD Dual Rate Coil Springs designed for great ride quality across any terrain
- HD springs offer additional load capacity for vehicles equipped with winch bumper, fullsize spare, roof rack, etc.
- Front/Rear FOX 2.0 Performance Series shocks specifically valved for this suspension system for improved performance on and off-road
- Front Adjustable Track Bar and Rear Track Bar Bracket to correct axle positioning under vehicle
- Front Sway Bar Quicker Disconnects and Rear Sway Bar Links for increased offroad articulation
- Front/Rear Bump Stop Extensions to properly limit suspension up travel
- Front/Rear J-Link Lower Control Arms to add strength and correct caster
JKS Manufacturing JSPEC124KFP Notes:
- J-Konnect: Builds on J-Venture with heavy-duty J-Link lower control arms to improve strength and correct geometry.
- Rubicon Models (all kits): Tire: 37x12.50; Wheel: 17x9, 18x9, 20x9; Backspacing: 5"; Non-Rubicon Models (all kits): Tire: 35x12.50; Wheel: 17x9, 18x9, 20x9; Backspacing: 5"; Other tire/wheel sizes can be used, however may require additional modifications.
Part TypeSuspension Lift Kit
BrandJKS MANUFACTURING
Package Width166.35
Weight166.35 PG
Part CategoryPerformance Parts
Part FitmentDirect Fit
Vendor Part NumberJSPEC124KFP
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
