Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
KING ENGINE BEARINGSPART NUMBER: 429-MB5382XPG.25
Main Bearing Set for Subaru EJ20, EJ22, EJ25 (Thrust In #5 Position)
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Main Bearing Set
- for Subaru EJ20, EJ22, EJ25 (Thrust In #5 Position)
- XP-Series
- .25mm Undersize
- New XPG Bearing Increases Oil Pressure & Reduces Oil Starvation Issues
King's new bearings are specifically engineered to solve premature bearing failure caused by low oil pressure or oil starvation that has plagued the high output Subaru EJ series boxer engines (EJ15, EJ16, EJ18, EJ20, EJ22, EJ25)."King conducted extensive research into the unique oiling circumstances of the Subaru EJ series engines," explained Ron Sledge, King's performance and technical manager. "What resulted is a completely re-engineered main bearing that eliminates oil leakage andincreases oil flow to number two and number three rods." To improve oil flow, oil slots on the King XPG bearings are replaced with oil holes for better oil distribution in the groove and more consistent oil flow. Fully grooved number three main bearings enable 360° oiling to number two and number three rod bearings. King XPG bearings feature a unique lug design that eliminates the conventional lug recess so no oil escapes and full oil pressure is maintained. In addition, narrowed bearing lengths help eliminate high-radius cranks. With enhanced tri-metal copper lead construction with nickel barrier and SecureBond adhesion, King XPG bearings have a 20 percent higher load capacity and better resist surface fatigue. King XPG Bearings are available for Subaru EJ series boxer engine applications, including rod bearings (CR4125XPG - 52mm journal) and main bearings (MB5382XPG - flange in #5 position). These new XPG parts are available in STD, .026, 0.25 and 0.5.
- King main bearings are sold in engine sets.
XP-Series Bearings:
King XP-Series bearings are for extreme performance in high-load capacity applications. These Tri-Metal copper lead bearings are designed use on cranks with large radii (narrow rod bearings) and feature enlarged, chamfered oil holes with 1/2 grooving (on most main bearings) for uncompromised lower bearing load capacity. Ideal for use in High Load & Endurance Applications.
What does the King part number Prefix/Suffix mean?
NOTE: The term "Undersize" refers to a thicker bearing which is used when the Crankshaft has been turned down and is now undersized, not the bearing itself. The term "Oversize" is typically a thinner bearing than stock to allow for increased clearance.
Product LineKing Main Bearings for Import Vehicles
BrandKING ENGINE BEARINGS
Package Height1.77
Package Width3.54
Package Length5.12
Weight0.91 PG
Vendor Part NumberMB5382XPG0.25
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
