$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

22616 Standard Grade Direct-Fit Catalytic Converter Fits Select Chevrolet, Geo, Suzuki Models
InfoVehicle Info Needed
MAGNAFLOWPART NUMBER: 642-22616

22616 Standard Grade Direct-Fit Catalytic Converter Fits Select Chevrolet, Geo, Suzuki Models

$22400
ShippingShips on 11/24/2026
Lowest PriceLowest Price Guarantee

Items You Need

Stainless Steel Standard V-Band Clamp & Flanges 3 in.

JEGS

Stainless Steel Standard V-Band Clamp & Flanges 3 in.

Part Number : 555-30871
$4199$46.99
You Save$5.00
Sure Seal 2-1/2" Clamp Fits 2.580" to 2.780"

JEGS

Sure Seal 2-1/2" Clamp Fits 2.580" to 2.780"

Part Number : 555-30802
$1699$19.99
You Save$3.00
HD Stainless Steel U-Clamp for 3 Inch OD Pipe

JEGS

HD Stainless Steel U-Clamp for 3 Inch OD Pipe

Part Number : 555-30723
$1099$11.99
You Save$1.00
Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

JEGS

Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

Part Number : 555-30722
$999$10.99
You Save$1.00

GM/Suzuki
Standard Grade Direct-Fit Catalytic Converter
  • Fits Select Chevrolet, Geo, Suzuki Models
  • Stainless Steel

    Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22616. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1989-1994 Geo Metro, 1991-1994 Suzuki Swift, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

    Magnaflow 22616 Standard Grade Direct-Fit Catalytic Converter Features:

    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
    • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Direct-Fit Catalytic Converters are built to bolt on easily and meet original equipment standards. Their ribbed body minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gas, and they hold the ceramic monolithic honeycomb catalyst in proper alignment. The ceramic coating is designed to maximize surface area & flow, and the coating process is strictly controlled to maintain exact specifications.

    Show More

    Features

    • Ribbed Body Minimizes Expansion
    • Monolithic Honeycomb Catalyst
    • Easy Bolt-On Installation

    Note: These catalytic converters are no longer legal for sale in the state of California and will not be shipped to the state of California.

    Part TypeCatalytic Converter
    Product LineMagnaflow Direct-Fit Catalytic Converters
    BrandMAGNAFLOW
    Package Height7.5
    Package Width21.75
    Package Length48.25
    Weight13.0 PG
    Part CategoryPerformance Parts
    Converter Style3-way
    Outlet Quantity1
    EmissionNon-California (49-State)
    Catalytic Converter FormatPre-Catalytic Converter and Main Catalytic Converter
    Inlet Size (In.)2
    Heat ShieldYes
    Heat Shield AttachedNo
    Air TubeNo
    Body Length9 in (228.6 mm)
    Inlet Diameter2 in (50.8 mm)
    Inlet QuantityOne
    Case MaterialStainless steel
    Universal Or Specific FitSpecific
    Outlet Size2 in (50.8 mm)
    Cat Converter Air Tube AdapterNot Air Tube Kit Adaptable
    Converter Body Size9.06 in. OD
    Oxygen Sensor LocationPre and Post Converter
    Body SizeOEM
    Outlet Diameter2 in (50.8 mm)
    QuantitySold individually
    Overall Length50.3 in (1277.6 mm)
    Core Substrate MaterialCeramic
    MaterialStainless Steel
    Inlet AttachmentStock flange
    California LegalNo
    California Air Board ApprovedNo
    Substrate MaterialCeramic honeycomb
    Outlet AttachmentStock flange
    Exhaust Pipe MaterialStainless Steel
    Exhaust Component Mount TypeUses Factory Hangers
    Recommended UseConverter
    Part FitmentDirect Fit
    Vendor Part Number22616
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning