Pre OBD-II California Universal Catalytic Converter Body Shape: Oval, Center/Center
Product Discontinued
MAGNAFLOWPART NUMBER: 642-332004

Pre OBD-II California Universal Catalytic Converter Body Shape: Oval, Center/Center

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

California Emissions Pre OBD-II Universal Catalytic Converters
  • Legal Engine/Weight Limit: 477ci/7.8L, 7000 lbs
    • Pre OBD-II California Universal Catalytic Converter
    • Body Shape: Oval, Center/Center
    • Inlet/Outlet: 2"
    • Width: 6.5"
    • Body Length: 12"
    • Overall Length: 16"

      E.O. D-193-117

    For engines built before 1996, these catalytic converters have stainless steel ribbed bodies that minimize expansion/distortion when the converter heats up. The ribs form a channel that protects pads from direct exposure to exhaust gas, plus they keep the ceramic catalyst aligned. Rigid OE-type heat shields add structural stability, and strong 1/2" lap-joints fuse necks to the body (for best flow, necks don't extend into bodies).

    Show More

    Choosing the Correct Catalytic Converter

    1. Determine engine size and vehicle weight (there are legal limit regulations).

    2. Determine the type of catalytic converter being replaced:

    • Pre OBD-II converters are for vehicles built before 1996.
    • OBD-II converters must be used on vehicles built in 1996-Up.

    3. If the engine has been changed and is not the same model year as the chassis, proceed as follows:

    • For engines older than the chassis, select the converter based on the chassis model year.
    • For engines newer than the chassis, select the converter according to the engine requirement.

    4. It is necessary to know which type of catalytic converter was originally used on the vehicle: 2-Way, 3-Way, or 3-Way + Air. Required by the EPA, this information (abbreviations listed below) is on the vehicle emission control label in the engine compartment. The label should be visible on the firewall, hood's underside, radiator support, fan shroud, or shock tower.

    • 2-Way (Oxidation) = OC or COC
    • 3-Way (Oxidation Reduction) = TWC or ORC
    • 3-Way + Air (3-Way plus Oxidation) = TWC/OC or ORC/OC

    Note: These Catalytic Converters are legal for sale, installation, or use on licensed vehicles in the state of California.

    Part TypeCatalytic Converter
    Product LineMagnaflow Pre OBD-II California Emissions Universal Catalytic Converters
    BrandMAGNAFLOW
    Package Height4.4
    Package Width7.3
    Package Length17.9
    Weight6.29 PG
    Part CategoryPerformance Parts
    Universal Or Specific FitUniversal
    Outlet Size2 in (50.8 mm)
    Cat Converter Air Tube AdapterNot Air Tube Kit Adaptable
    Carb Eo NumberD-193-117 (pdf)
    Converter Body SizeOEM
    Oxygen Sensor LocationN/A
    Body SizeOEM
    EmissionCalifornia
    Overall Length16 in (406.4 mm)
    Core Substrate MaterialCeramic
    MaterialStainless Steel
    Catalytic Converter FormatPre-Catalytic Converter and Main Catalytic Converter
    Inlet Size (In.)2
    California Air Board ApprovedYes
    Substrate MaterialOEM
    Body Length12 in (304.8 mm)
    Recommended UseConverter
    Vendor Part Number332004
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!

    Pre OBD-II California Universal Catalytic Converter Body Shape: Oval, Center/Center — MAGNAFLOW