The high tensile strength of the material combined with the hard coating on all high wear areas means a much longer duty life than common cast pulleys with no chance of any type of fracturing or structural failure. All pulleys and brackets have a "No Polishing" maintenance-free clear powdercoating. An adjustable stainless steel tensioning rod with chrome-moly rod ends and mounting hardware is also included. There are two pulley ratios available; Performance to increase horsepower by reducing accessory drag, with typical gains of 12-15 horsepower at the rear wheels and High Water Flow to increase cooling by speeding up water flow and fan speed, critical for low speed driving where most overheating occurs.

Kits Include:

• Alternator Bracket and Tensioner
• Crank Pulley
• Water Pump Pulley with Nose Cover
• Alternator Pulley with Fan and Nose Cover
• Reverse Rotation Alternator Only Kit Includes Idler Bracket and Idler Pulley
• Grade 8 Mounting Hardware Power Steering Kits Add:
• Power Steering Bracket and Pulley A/C Kits Add:
• A/C Bracket, Idler and Clutch Cover Kits Require:
• 90 Degree Angle Thermostat Housing
• March 655-P560 Ford Alternator or 6-12 O'clock Mounting
• Standard Rotation Water Pump Kits Require Ford Racing M8501-G351 Water Pump
• Reverse Rotation Water Pump Kits Require 1979-96 Reverse Rotation Water pump with Driver Side Inlet
• Power Steering Kits Require 1978-95 Mustang Power Steering Pump
• Water Pump and Radiator with Driver Side Lower Radiator Hose
• Some Kits May Require Crank Pulley Spacers
• Must Use Electric Fuel Pump with Kits That Includes Power Steering