

30 in. Drive-Up Service Ramps, 1-Piece Design, 5 in. Height, 16-Deg Incline
- Drive-Up Service Ramps
- 1-Piece Design
- 30 in. L x 10 in. W x 5 in. H
- Ramp Incline: 16-Deg
- Weight Capacity (per): 1,750 lbs.
- Axle Weight Capacity: 3,500 lbs.
- Vehicle Weight Capacity: 7,000 lbs.
- Weight (per): 4 lbs.
- Set of 2
Max Ramps MR30-5 30 in. Drive-Up Service Ramps, 1-Piece Design Features:
These 30" long drive-up service ramps provide a 5-inch lift for common sedans and classic vehicles that are stock height. At 10-inches wide, the maximum recommended tire width to use on the ramps is 8-inches. Use these ramps when you need a lift for a show display, washing and waxing, or for performing general vehicle maintenance such as oil changes. These ramps have a 16-degree angle and weigh 4 lbs. per ramp. Each pair of ramps support 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs. Made with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.
![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)



![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)

![3-Ton Aluminum Floor Jack [6,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80077.jpg)

![Drain Pan [7 Quart]](https://www.jegs.com/images/mini_200/500/555/555-w4070.jpg)

![Rolling Work Table [200 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81420.jpg)
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)