300 Series Electric Water Pump Small Block Ford

Name: 300 Series Electric Water Pump Small Block Ford
Brand: MEZIERE
SKU: 680-WP311B16
Price: 505.99 USD
Availability: OutOfStock

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Ford - Small Block

Small Block Ford
55 GPM
16-Volt Motor
Blue Anodized Finish

These pumps share the feature of 55 gallons per minute flow. The WP312 water pump has a free wheeling idler pulley making this pump fully street ready and 5.0L enthusiast a dream come true. The WP311 has all the same features without the pulley making it perfect for racing applications. Features driver & passenger side inlet ports. Heater & bypass fittings included. 1-3/4' NPT inlet fitting included.

Note: Will not fit "short water pump" timing covers; 1992 & up T-Bird, Cougar, Explorer, All '94 & '95 Mustangs, and early Lightning F-150s.

Features:
Fits small block Ford Windsor and 5.0L models pre 1994
Upgraded motor for 16-volt electrical systems
Suitable for street or drag strip use - 3000+ hour life expectancy
Show quality finish
Standard motor provides 55 gallons per minute free flow rating
All stainless steel hardware included
Ports provided for heater and bypass
Inlet fitting, heater and bypass fitting included
Driver's or passenger's side lower hose connection
Stainless steel large diameter main shaft with high performance ceramic seal
Alternate inlet fittings available

Technical Specifications:
Belt Drives: If you are running a cam belt drive on your small block Ford, you will most likely need the WP173 pump. This pump will not fit Yates, Danny B, Jesel, or Race Master belt drives.
Finishing The System: This pump is supplied complete with gaskets, hardware and fittings. No additional items should be necessary.
Amperage draw: Under normal use the pump will draw 11-12 amps.
Overall Height Dimension: The standard pump is 6.00' long from the mounting surface to the tip of the pump.
Pump Weight: This application weighs 8.6 lbs.
16-volt systems: When purchasing a pump for a 16-volt system we recommend the 16-volt optional motor on our pump. The 12-volt pump will work for limited use applications.

Additional Notes: The standard 35GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only. This model does not accept heater or bypass hoses as a standard.