![Front Upper Control Arm and Ball Joint Assembly for 1999-2004 Chevy Silverado 2500, 1999-2004 GMC Sierra 2500 [Stamped Steel]](https://www.jegs.com/images/mini_750/700/719/719-ck620053.jpg)
MOOGPART NUMBER: 719-CK620053
Front Upper Control Arm and Ball Joint Assembly for 1999-2004 Chevy Silverado 2500, 1999-2004 GMC Sierra 2500 [Stamped Steel]
$18299
Items You Need
Front Upper Control Arm and Ball Joint Assembly1999-2004 Chevy Silverado 2500, 2000-2012 Suburban 2500, 1999-2004 GMC Sierra 2500, 2000-2012 Yukon XL 2500 Threaded Stud Stamped Steel Control Arm Black Finish Sold Individually
This MOOG front upper control arm and ball joint assembly is a direct-fit replacement for 1999-2004 Chevy Silverado 2500, 2000-2012 Suburban 2500, 1999-2004 GMC Sierra 2500, 2000-2012 Yukon XL 2500. Gusher bearing design lets grease pass through the bearing surface to cut friction at the stud. Belleville preload washer keeps the bearing package tight as the internal bearings wear.
MOOG CK620053 Control Arm and Ball Joint Assembly Features:
- Fits 1999-2004 Chevy Silverado 2500, 2000-2012 Suburban 2500, 2001-2003 & 2005-2006 Silverado 1500 HD, 1999-2004 GMC Sierra 2500, 2000-2012 Yukon XL 2500, 2001-2003 & 2005-2006 Sierra 1500 HD
- Also fits 2001-2010 Chevy Silverado 2500 HD, 2001-2006 Silverado 3500, 2001-2010 GMC Sierra 2500 HD, 2001-2006 Sierra 3500
- Mounting position: front upper
- Press-in ball joint is included with the arm
- Threaded stud design
- Grease fitting included for periodic lubrication
- Mounting hardware included
- Gusher bearing design lets grease pass through the bearing surface to cut friction at the stud
- Belleville preload washer keeps the bearing package tight as the internal bearings wear
- Bushings come pre-installed in the arm, so no bushing press work is needed
- Pre-installed dust boot shields the socket from dirt and water
- Greaseable socket accepts new lubricant that flushes out contaminants
- Arm is made from stamped steel
- Bushing material is rubber
- Black finish
- Sold individually
Part TypeSuspension Control Arm
BrandMOOG
Package Width11.3
Weight11.3 PG
Part CategoryReplacement Parts
Grease Fitting IncludedYes
Ball Joint Stud TypeThreaded
Pre-GreasedYes
Ball Joint IncludedYes
PositionFront Upper
Bushing MaterialRubber
Ball Joint Mounting TypePress In
QuantitySold Individually
Mounting Hardware IncludedYes
Control Arm ColorBlack
AdjustableNo
Control Arm MaterialStamped Steel
Part FitmentDirect Fit
Bushings IncludedYes
Vendor Part NumberCK620053
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)


![Pistol Grip Grease Gun [14 oz]](https://www.jegs.com/images/mini_200/500/555/555-81018.jpg)

![3-Ton Low-Profile Professional Floor Jack [6,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80038.jpg)

![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![3/8 in. Drive Metric Socket Set [10-Piece, 6-Point]](https://www.jegs.com/images/mini_200/500/555/555-w38202.jpg)
