
MOOGPART NUMBER: 719-ES423L
Front Outer Tie Rod End for 1980-1985 Ford L800, 1980-1985 LN800, 1981-1990 LN8000, 1981-1991 LNT9000, 1981-1991 LT9000
$8487
Items You Need
Front Outer Tie Rod End1980-1985 Ford L800, 1980-1985 LN800, 1981-1991 LNT9000, 1981-1991 LT9000, 1991-2012 Thomas Saf-T-Liner 1.125 In.-12 Male Thread 5.44 in. Stud Center to End Greaseable Socket Sold Individually
MOOG ES423L is a front outer tie rod end made to fit 1980-1985 Ford L800, 1980-1985 LN800, 1981-1991 LNT9000, 1981-1991 LT9000, 1991-2012 Thomas Saf-T-Liner. Gusher bearing design lets grease pass through the bearing surface to cut friction at the stud. Pressed-in cover plate seals out debris and holds the internal bearing package tight.
MOOG ES423L Tie Rod End Features:
- Fits 1980-1985 Ford L800, 1980-1985 LN800, 1981-1991 LNT9000, 1981-1991 LT9000, 1991-2012 Thomas Saf-T-Liner, 2001-2004 Sterling Truck Acterra 5500, 2001-2004 Acterra 6500, 2001-2004 Acterra 7500
- Also fits 1981-1990 Ford LN8000, 1981-1991 LTS9000
- Mounting position: front left, front left outer, front right outer
- End 1 thread is 1.125 in.-12 left-hand male
- Length from stud center to end is 5.44 in.
- Greaseable design accepts fresh grease at service intervals
- Gusher bearing design lets grease pass through the bearing surface to cut friction at the stud
- Pressed-in cover plate seals out debris and holds the internal bearing package tight
- Belleville preload washer keeps the bearing package tight as the internal bearings wear
- Ball stud is heat treated to OE-equivalent requirements
- Sold individually
Part TypeTie Rod End
BrandMOOG
Package Width3.6
Weight3.6 PG
Part CategoryReplacement Parts
PositionFront Left, Front Left Outer, Front Right Outer
End 2 GenderMale
End 1 GenderMale
GreaseableYes
End 1 Thread DirectionCounterclockwise
QuantitySold Individually
End 1 Thread Size1.125 in.-12
Dust Boot IncludedNo
Part FitmentDirect Fit
Length - Stud Center To End5.44 in.
Vendor Part NumberES423L
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)
![Tie Rod End and Pitman Arm Puller [Opening size: 1 1/8 in. (27 mm)]](https://www.jegs.com/images/mini_200/500/555/555-80620.jpg)

![Pistol Grip Grease Gun [14 oz]](https://www.jegs.com/images/mini_200/500/555/555-81018.jpg)

![3-Ton Low-Profile Professional Floor Jack [6,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80038.jpg)

![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![3/8 in. Drive Metric Socket Set [10-Piece, 6-Point]](https://www.jegs.com/images/mini_200/500/555/555-w38202.jpg)
