
MOOGPART NUMBER: 719-EV800457
Front Inner Tie Rod End for 2007-2014 Ford Expedition, 2009-2014 F-150, 2007-2014 Lincoln Navigator
$4299
6 left in stockItems You Need
Front Inner Tie Rod End2007-2014 Ford Expedition, 2009-2014 F-150, 2007-2014 Lincoln Navigator M18 Male & M16 Male Threads 283.5 Stud Center to End Gusher Bearing Design Belleville Preload Washer Sold Individually
The MOOG EV800457 front inner tie rod end is built as a direct replacement for 2007-2014 Ford Expedition, 2009-2014 F-150, 2007-2014 Lincoln Navigator. Gusher bearing design lets grease pass through the bearing surface to cut friction at the stud. Belleville preload washer keeps the bearing package tight as the internal bearings wear.
MOOG EV800457 Tie Rod End Features:
- Fits 2007-2014 Ford Expedition, 2009-2014 F-150, 2007-2014 Lincoln Navigator
- Mounting position: front inner
- End 1 thread is M18 male; End 2 thread is M16 male
- Length from stud center to end is 283.5
- Gusher bearing design lets grease pass through the bearing surface to cut friction at the stud
- Belleville preload washer keeps the bearing package tight as the internal bearings wear
- Ball stud is heat treated to OE-equivalent requirements
- Wrench flats on the housing and stud simplify installation and toe adjustment
- Pre-applied thread locking compound resists self-loosening
- Sold individually
Part TypeTie Rod End
BrandMOOG
Package Height2.0
Package Width2.0
Package Length13.5
Weight2.34 PG
Part CategoryReplacement Parts
PositionFront Inner
End 2 GenderMale
End 1 GenderMale
End 2 Thread SizeM16
QuantitySold Individually
End 1 Thread SizeM18
Part FitmentDirect Fit
Length - Stud Center To End283.5
Vendor Part NumberEV800457
Package Qty1
Package TypeEA
Some parts are not legal for use in California or other states with similar laws / regulations

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)
![Tie Rod End and Pitman Arm Puller [Opening size: 1 1/8 in. (27 mm)]](https://www.jegs.com/images/mini_200/500/555/555-80620.jpg)

![3-Ton Low-Profile Professional Floor Jack [6,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80038.jpg)

![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![3/8 in. Drive Metric Socket Set [10-Piece, 6-Point]](https://www.jegs.com/images/mini_200/500/555/555-w38202.jpg)
