![Front Right Lower Control Arm and Ball Joint Assembly for 2002-2006 Nissan Altima, 2004-2008 Maxima [Forged Aluminum]](https://www.jegs.com/images/mini_750/700/719/719-rk620166.jpg)
MOOGPART NUMBER: 719-RK620166
Front Right Lower Control Arm and Ball Joint Assembly for 2002-2006 Nissan Altima, 2004-2008 Maxima [Forged Aluminum]
$17999
5 left in stockItems You Need
Front Right Lower Control Arm and Ball Joint Assembly2002-2006 Nissan Altima, 2004-2008 Maxima Press-In Ball Joint Included Threaded Stud 17.73 in. Arm Length Coated Studs Forged Aluminum Control Arm Gray Finish Sold Individually
This MOOG front right lower control arm and ball joint assembly is a direct-fit replacement for 2002-2006 Nissan Altima, 2004-2008 Maxima. Bushing compound resists wear, salt, road grime and oil exposure. E-coat finish on the metal surfaces resists rust from road salt and moisture.
MOOG RK620166 Control Arm and Ball Joint Assembly Features:
- Fits 2002-2006 Nissan Altima, 2004-2008 Maxima
- Mounting position: front right lower
- Press-in ball joint is included with the arm
- Threaded stud design
- Maximum arm length is 17.73 in.
- Sealed design with no grease fitting required
- Mounting hardware included
- Bushing compound resists wear, salt, road grime and oil exposure
- E-coat finish on the metal surfaces resists rust from road salt and moisture
- Studs are coated to resist corrosion
- Pre-installed dust boot shields the socket from dirt and water
- Carbon fiber-reinforced bearing lowers socket friction
- Induction-hardened stud resists breakage and fatigue
- Laser-etched ID marking identifies the part after installation
- Arm is made from forged aluminum
- Sold individually
Part TypeSuspension Control Arm
BrandMOOG
Package Width8.5
Weight8.5 PG
Part CategoryReplacement Parts
Grease Fitting IncludedNo
Ball Joint Stud TypeThreaded
Pre-GreasedYes
Ball Joint IncludedYes
PositionFront Right Lower
Bushing MaterialRubber
Ball Joint Mounting TypePress In
QuantitySold Individually
Mounting Hardware IncludedYes
Control Arm ColorGray
AdjustableNo
Control Arm MaterialForged Aluminum
Control Arm Maximum Length17.73 in.
Part FitmentDirect Fit
Bushings IncludedYes
Vendor Part NumberRK620166
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)


![Pistol Grip Grease Gun [14 oz]](https://www.jegs.com/images/mini_200/500/555/555-81018.jpg)

![3-Ton Low-Profile Professional Floor Jack [6,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80038.jpg)

![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![3/8 in. Drive Metric Socket Set [10-Piece, 6-Point]](https://www.jegs.com/images/mini_200/500/555/555-w38202.jpg)
