![Front Left Lower Control Arm and Ball Joint Assembly for 2002-2006 Nissan Altima, 2004-2008 Maxima [Forged Aluminum]](https://www.jegs.com/images/mini_750/700/719/719-rk620167.jpg)
MOOGPART NUMBER: 719-RK620167
Front Left Lower Control Arm and Ball Joint Assembly for 2002-2006 Nissan Altima, 2004-2008 Maxima [Forged Aluminum]
$17999
Items You Need
Front Left Lower Control Arm and Ball Joint Assembly2002-2006 Nissan Altima, 2004-2008 Maxima Press-In Ball Joint Included Threaded Stud 17.73 in. Arm Length Forged Aluminum Control Arm Gray Finish Sold Individually
The MOOG RK620167 front left lower control arm and ball joint assembly is built as a direct replacement for 2002-2006 Nissan Altima, 2004-2008 Maxima. Bushings come pre-installed in the arm, so no bushing press work is needed. Carbon fiber-reinforced bearing lowers socket friction.
MOOG RK620167 Control Arm and Ball Joint Assembly Features:
- Fits 2002-2006 Nissan Altima, 2004-2008 Maxima
- Mounting position: front left lower
- Press-in ball joint is included with the arm
- Threaded stud design
- Maximum arm length is 17.73 in.
- Sealed design with no grease fitting required
- Mounting hardware included
- Bushings come pre-installed in the arm, so no bushing press work is needed
- Pre-installed dust boot shields the socket from dirt and water
- Carbon fiber-reinforced bearing lowers socket friction
- Induction-hardened stud resists breakage and fatigue
- Laser-etched ID marking identifies the part after installation
- Protective coating on metal surfaces resists rust and road grime
- Arm is made from forged aluminum
- Bushing material is rubber
- Sold individually
Part TypeSuspension Control Arm
BrandMOOG
Package Width9.0
Weight9.0 PG
Part CategoryReplacement Parts
Grease Fitting IncludedNo
Ball Joint Stud TypeThreaded
Pre-GreasedYes
Ball Joint IncludedYes
PositionFront Left Lower
Bushing MaterialRubber
Ball Joint Mounting TypePress In
QuantitySold Individually
Mounting Hardware IncludedYes
Control Arm ColorGray
AdjustableNo
Control Arm MaterialForged Aluminum
Control Arm Maximum Length17.73 in.
Part FitmentDirect Fit
Bushings IncludedYes
Vendor Part NumberRK620167
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)


![Pistol Grip Grease Gun [14 oz]](https://www.jegs.com/images/mini_200/500/555/555-81018.jpg)

![3-Ton Low-Profile Professional Floor Jack [6,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80038.jpg)

![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![3/8 in. Drive Metric Socket Set [10-Piece, 6-Point]](https://www.jegs.com/images/mini_200/500/555/555-w38202.jpg)
