![Ultra 40 Unsleeved Spark Plug Wire Set with 5 in. Straight Pro Boots [Black 8.65mm]](https://www.jegs.com/images/mini_750/700/710/710-73839.jpg)
Ultra 40 Unsleeved Spark Plug Wire Set with 5 in. Straight Pro Boots [Black 8.65mm]
Purpose-built race heads put the plugs in places no off-the-shelf wire set was cut for. This universal Ultra 40 set is built to be routed and cut to length for the combination in front of you, with a long 5 in. straight Pro Boot that reaches down into a deep plug well past the header tube.
Moroso 73839 Ultra 40 Spark Plug Wire Set Features:
- Universal set intended to be cut and terminated to length.
- 8.65mm diameter Ultra 40 wire.
- 5 in. long straight Pro Boot for deep or shrouded plug locations.
- Unsleeved construction.
- Suits GM Pro Stock, Brodix PB201, CFE, Ford and Yates style cylinder heads.
- Black wire.
Strong Spark for Less
Ultra 40 Unsleeved Spark Plug Wires are a cost-effective performance wire without heat sleeving. The wires feature a Kevlar core, four times stronger than other aramid fiber cores, which increases the tensile strength of the wire while reducing its center diameter. That allows for the surrounding insulation to be thicker, resulting in higher dielectric efficiency. With only 40-ohms of resistance per foot, these wires will increase power by bringing more spark to the plug. RFI/EMI resistant to eliminate stereo feedback or ignition interference.

![Ignition Wire Shrink Sleeve [18 Per Pack, Black]](https://www.jegs.com/images/mini_200/700/710/710-72031.jpg)
![Ignition Wire Markers [Numbered 1-8, 2 of Each Number, Shrink Style]](https://www.jegs.com/images/mini_200/700/710/710-72020.jpg)

