$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

New Item Badge
V-Power Nickel Spark Plug [M14-1.25 Thread, 0.375 in. Reach, 3/4 in. Hex, Heat Range 8]
InfoVehicle Info Needed
NGK SPARK PLUGSPART NUMBER: 739-2218

V-Power Nickel Spark Plug [M14-1.25 Thread, 0.375 in. Reach, 3/4 in. Hex, Heat Range 8]

$818
More than 10 available
ShippingShips Today
Lowest PriceLowest Price Guarantee

Items You Need

Spark Plug Socket Set, 3/8 in. Drive [SAE/Metric 5-Piece]

JEGS

Spark Plug Socket Set, 3/8 in. Drive [SAE/Metric 5-Piece]

Part Number : 555-80509
$1799$20.99
You Save$3.00
Spark Plug Gauge & Gap Tool

JEGS

Spark Plug Gauge & Gap Tool

Part Number : 555-W162C
$499$5.99
You Save$1.00
Spark Plug Thread Chaser 14mm and 18mm

JEGS

Spark Plug Thread Chaser 14mm and 18mm

Part Number : 555-80507
$949$10.99
You Save$1.50
Spark Plug Boot Puller [Adjustable]

JEGS

Spark Plug Boot Puller [Adjustable]

Part Number : 555-W80519
$2099$23.99
You Save$3.00

V-Power Nickel Spark Plug
  • M14-1.25 Thread
  • 0.375 in. Reach
  • 3/4 in. (19 mm) Hex
  • Flat Seat
  • Heat Range 8
  • 0.028 in. Pre-Gap
  • Nickel Center Electrode
  • Sold Individually

    The NGK 2218 V-Power Nickel spark plug is a replacement plug. It has M14-1.25 threads, a 0.375 in. reach, a 3/4 in. (19 mm) hex and a heat range of 8. A V-groove cut in the nickel alloy center electrode improves ignitability over a flat-tip nickel plug.

    NGK 2218 V-Power Nickel Spark Plug Features:

    • M14-1.25 metric thread with 0.375 in. reach
    • 3/4 in. (19 mm) hex
    • Flat seat with crush washer installed
    • Heat range 8
    • 0.028 in. factory pre-gap
    • Nickel center electrode tip with nickel ground electrode tip
    • Resistor type (10000 ohm) for ignition noise suppression
    • Non-removable nut terminal
    • 1.480 in. insulator height
    • V-groove cut in the nickel alloy center electrode improves ignitability over a flat-tip nickel plug
    • Copper core center electrode draws heat away from the firing end
    • Alumina silicate ceramic insulator for high dielectric strength
    • Trivalent metal plating resists corrosion and thread seizing
    • Intended for engines that originally used nickel alloy plugs, not as a replacement for factory precious metal plugs
    • Sold individually
  • Part TypeSpark Plug
    BrandNGK SPARK PLUGS
    Part CategoryReplacement Parts
    Pre-Gap Size0.028 in
    Ground Electrode Quantity1
    Washer TypeCrush
    Ground ConfigurationJ-Gap
    Center Electrode Core MaterialCopper
    Thread Type StandardMetric
    Short Style Spark PlugYes
    Washer(S) IncludedYes
    Seat TypeFlat
    Insulator Height1.480 in
    Center Electrode Tip MaterialNickel
    Center Electrode Insulator Tip Projection0.120 in
    Ground Electrode Core MaterialNickel
    Ground Electrode Tip MaterialNickel
    Resistor TypeYes
    Manufacturer Heat Range8
    Reach0.375 in
    Ground Electrode Tip DesignStandard
    Electrical Terminal TypeNon-Removable Nut
    Center Electrode DesignStandard
    QuantitySold Individually
    Thread SizeM14-1.25
    Center Electrode ProjectionMid Projection
    SkirtNo
    Resistance10000 ohm
    Insulator MaterialCeramic
    MetallurgyCopper
    Part FitmentUniversal
    Hex Size3/4 in (19 mm)
    Vendor Part Number2218
    Package Qty1
    Package TypeEA

    ITEM YOU MAY ALSO CONSIDER

    E3 Spark Plug 14mm

    E3 SPARK PLUGS

    E3 Spark Plug 14mm

    Part Number : 368-E3.12
    $497$7.99
    You Save$3.02
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning