New Item Badge
Laser Iridium Spark Plug [M14-1.25 Thread, 0.750 in. Reach, 5/8 in. Hex, Heat Range 5]
InfoVehicle Info Needed
NGK SPARK PLUGSPART NUMBER: 739-5899

Laser Iridium Spark Plug [M14-1.25 Thread, 0.750 in. Reach, 5/8 in. Hex, Heat Range 5]

$2056
1 left in stock
ShippingShips Today
Lowest PriceLowest Price Guarantee

Items You Need

Spark Plug Socket Set, 3/8 in. Drive [SAE/Metric 5-Piece]

JEGS

Spark Plug Socket Set, 3/8 in. Drive [SAE/Metric 5-Piece]

Part Number : 555-80509
$1799$20.99
You Save$3.00
Spark Plug Gauge & Gap Tool

JEGS

Spark Plug Gauge & Gap Tool

Part Number : 555-W162C
$499$5.99
You Save$1.00
Spark Plug Thread Chaser 14mm and 18mm

JEGS

Spark Plug Thread Chaser 14mm and 18mm

Part Number : 555-80507
$949$10.99
You Save$1.50
Spark Plug Boot Puller [Adjustable]

JEGS

Spark Plug Boot Puller [Adjustable]

Part Number : 555-W80519
$2099$23.99
You Save$3.00

Laser Iridium Spark Plug
  • M14-1.25 Thread
  • 0.750 in. Reach
  • 5/8 in. (16 mm) Hex
  • Flat Seat
  • Heat Range 5
  • 0.032 in. Pre-Gap
  • Iridium Center Electrode
  • Sold Individually

    The NGK 5899 Laser Iridium spark plug is a replacement plug. It has M14-1.25 threads, a 0.750 in. reach, a 5/8 in. (16 mm) hex and a heat range of 5. A fine wire iridium alloy center electrode built to the original equipment design delivers long service intervals in late-model engines.

    NGK 5899 Laser Iridium Spark Plug Features:

    • M14-1.25 metric thread with 0.750 in. reach
    • 5/8 in. (16 mm) hex
    • Flat seat with crush washer installed
    • Heat range 5
    • 0.032 in. factory pre-gap
    • Iridium center electrode tip with platinum ground electrode tip
    • Resistor type (5000 ohm) for ignition noise suppression
    • Non-removable nut terminal
    • 1.990 in. insulator height
    • Fine wire iridium alloy center electrode built to the original equipment design for long service intervals
    • Platinum protected ground electrode where specified for even wear in distributorless ignition systems
    • Copper core center electrode draws heat away from the firing end
    • Trivalent metal plating resists corrosion and thread seizing
    • Intended for engines that originally used fine wire iridium plugs
    • Sold individually
  • Part TypeSpark Plug
    BrandNGK SPARK PLUGS
    Part CategoryReplacement Parts
    Pre-Gap Size0.032 in
    Ground Electrode Quantity1
    Washer TypeCrush
    Ground ConfigurationJ-Gap
    Center Electrode Core MaterialCopper
    Thread Type StandardMetric
    Short Style Spark PlugNo
    Washer(S) IncludedYes
    Seat TypeFlat
    Insulator Height1.990 in
    Center Electrode Tip MaterialIridium
    Center Electrode Insulator Tip Projection0.350 in
    Ground Electrode Core MaterialNickel
    Ground Electrode Tip MaterialPlatinum
    Resistor TypeYes
    Manufacturer Heat Range5
    Reach0.750 in
    Ground Electrode Tip DesignStandard
    Electrical Terminal TypeNon-Removable Nut
    Center Electrode DesignFine Wire
    QuantitySold Individually
    Thread SizeM14-1.25
    Center Electrode ProjectionExtra-Long Projection
    SkirtNo
    Resistance5000 ohm
    Insulator MaterialCeramic
    MetallurgyIridium Platinum
    Part FitmentUniversal
    Hex Size5/8 in (16 mm)
    Vendor Part Number5899
    Package Qty1
    Package TypeEA

    ITEM YOU MAY ALSO CONSIDER

    E3 Spark Plug 14mm

    E3 SPARK PLUGS

    E3 Spark Plug 14mm

    Part Number : 368-E3.20
    $799
    E3 Spark Plug 14mm

    E3 SPARK PLUGS

    E3 Spark Plug 14mm

    Part Number : 368-E3.48
    $849
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning