
![Racing Spark Plug for 2011 LEM RX 65 Motard [M14-1.25 Thread, 0.750 in. Reach, 5/8 in. Hex, Heat Range 11]](https://www.jegs.com/images/mini_750/700/739/739-6596.jpg)
NGK SPARK PLUGSPART NUMBER: 739-6596
Racing Spark Plug for 2011 LEM RX 65 Motard [M14-1.25 Thread, 0.750 in. Reach, 5/8 in. Hex, Heat Range 11]
$2077
More than 10 availableItems You Need
Racing Spark Plug2011 LEM RX 65 Motard M14-1.25 Thread 0.750 in. Reach 5/8 in. (16 mm) Hex Flat Seat Heat Range 11 0.020 in. Pre-Gap Nickel Center Electrode Sold Individually
The NGK 6596 Racing spark plug is a replacement plug for 2011 LEM RX 65 Motard. It has M14-1.25 threads, a 0.750 in. reach, a 5/8 in. (16 mm) hex and a heat range of 11. It is built for racing use, with electrode configurations chosen for durability and ignitability under race conditions.
NGK 6596 Racing Spark Plug Features:
- Fits 2011 LEM RX 65 Motard
- M14-1.25 metric thread with 0.750 in. reach
- 5/8 in. (16 mm) hex
- Flat seat with crush washer installed
- Heat range 11
- 0.020 in. factory pre-gap
- Nickel center electrode tip with nickel ground electrode tip
- Non-resistor design
- Non-removable nut terminal
- 1.990 in. insulator height
- Racing design with special electrode configurations for durability and ignitability under race conditions
- Alumina silicate ceramic insulator for high dielectric strength
- Copper core center electrode draws heat away from the firing end
- Rolled threads help prevent cross-threading in the cylinder head
- Intended for racing use
- Sold individually
Part TypeSpark Plug
BrandNGK SPARK PLUGS
Part CategoryPerformance Parts
Pre-Gap Size0.020 in
Ground Electrode Quantity1
Washer TypeCrush
Ground ConfigurationJ-Gap
Center Electrode Core MaterialCopper
Thread Type StandardMetric
Short Style Spark PlugNo
Washer(S) IncludedYes
Seat TypeFlat
Insulator Height1.990 in
Center Electrode Tip MaterialNickel
Center Electrode Insulator Tip Projection0.040 in
Ground Electrode Core MaterialNickel
Ground Electrode Tip MaterialNickel
Resistor TypeNo
Manufacturer Heat Range11
Reach0.750 in
Ground Electrode Tip DesignStandard
Electrical Terminal TypeNon-Removable Nut
Center Electrode DesignStandard
QuantitySold Individually
Thread SizeM14-1.25
Center Electrode ProjectionNon-Projected
SkirtNo
Insulator MaterialCeramic
MetallurgyCopper
Part FitmentDirect Fit
Hex Size5/8 in (16 mm)
Vendor Part Number6596
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Spark Plug Socket Set, 3/8 in. Drive [SAE/Metric 5-Piece]](https://www.jegs.com/images/mini_200/500/555/555-80509.jpg)


![Spark Plug Boot Puller [Adjustable]](https://www.jegs.com/images/mini_200/500/555/555-w80519.jpg)


![Wobble Extension Set, 1/4 in., 3/8 in. & 1/2 in. Drives [9-Piece]](https://www.jegs.com/images/mini_200/500/555/555-58210.jpg)

