
![Standard Nickel Spark Plug for 2002-2004 E-TON Viper Jr. [M14-1.25 Thread, 0.375 in. Reach, 3/4 in. Hex, Heat Range 7]](https://www.jegs.com/images/mini_750/700/739/739-6703.jpg)
NGK SPARK PLUGSPART NUMBER: 739-6703
Standard Nickel Spark Plug for 2002-2004 E-TON Viper Jr. [M14-1.25 Thread, 0.375 in. Reach, 3/4 in. Hex, Heat Range 7]
$762
Items You Need
Standard Nickel Spark Plug2002-2004 E-TON Viper Jr. M14-1.25 Thread 0.375 in. Reach 3/4 in. (19 mm) Hex Flat Seat Heat Range 7 0.028 in. Pre-Gap Nickel Center Electrode Sold Individually
The NGK 6703 Standard Nickel spark plug is a replacement plug for 2002-2004 E-TON Viper Jr.. It has M14-1.25 threads, a 0.375 in. reach, a 3/4 in. (19 mm) hex and a heat range of 7. Its nickel alloy center electrode and copper core follow the original equipment design for engines that came with nickel plugs.
NGK 6703 Standard Nickel Spark Plug Features:
- Fits 2002-2004 E-TON Viper Jr.
- M14-1.25 metric thread with 0.375 in. reach
- 3/4 in. (19 mm) hex
- Flat seat with crush washer installed
- Heat range 7
- 0.028 in. factory pre-gap
- Nickel center electrode tip with nickel ground electrode tip
- Resistor type (10000 ohm) for ignition noise suppression
- Non-removable nut terminal
- 1.480 in. insulator height
- Nickel alloy center electrode built to the original equipment design
- Copper core center electrode draws heat away from the firing end
- Alumina silicate ceramic insulator for high dielectric strength
- Trivalent metal plating resists corrosion and thread seizing
- Rolled threads help prevent cross-threading in the cylinder head
- Intended for engines that originally used nickel alloy plugs, not as a replacement for factory precious metal plugs
Part TypeSpark Plug
BrandNGK SPARK PLUGS
Part CategoryReplacement Parts
Pre-Gap Size0.028 in
Ground Electrode Quantity1
Washer TypeCrush
Ground ConfigurationJ-Gap
Center Electrode Core MaterialCopper
Thread Type StandardMetric
Short Style Spark PlugYes
Washer(S) IncludedYes
Seat TypeFlat
Insulator Height1.480 in
Center Electrode Tip MaterialNickel
Center Electrode Insulator Tip Projection0.120 in
Ground Electrode Core MaterialNickel
Ground Electrode Tip MaterialNickel
Resistor TypeYes
Manufacturer Heat Range7
Reach0.375 in
Ground Electrode Tip DesignStandard
Electrical Terminal TypeNon-Removable Nut
Center Electrode DesignStandard
QuantitySold Individually
Thread SizeM14-1.25
Center Electrode ProjectionMid Projection
SkirtNo
Resistance10000 ohm
Insulator MaterialCeramic
MetallurgyCopper
Part FitmentDirect Fit
Hex Size3/4 in (19 mm)
Vendor Part Number6703
Package Qty1
Package TypeEA
ITEM YOU MAY ALSO CONSIDER
Some parts are not legal for use in California or other states with similar laws / regulations
![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Spark Plug Socket Set, 3/8 in. Drive [SAE/Metric 5-Piece]](https://www.jegs.com/images/mini_200/500/555/555-80509.jpg)


![Spark Plug Boot Puller [Adjustable]](https://www.jegs.com/images/mini_200/500/555/555-w80519.jpg)


![Wobble Extension Set, 1/4 in., 3/8 in. & 1/2 in. Drives [9-Piece]](https://www.jegs.com/images/mini_200/500/555/555-58210.jpg)


