
![Racing Spark Plug [M14-1.25 Thread, 0.750 in. Reach, 5/8 in. Hex, Heat Range 10]](https://www.jegs.com/images/mini_750/700/739/739-7942.jpg)
NGK SPARK PLUGSPART NUMBER: 739-7942
Racing Spark Plug [M14-1.25 Thread, 0.750 in. Reach, 5/8 in. Hex, Heat Range 10]
$1894
4 left in stockItems You Need
Racing Spark PlugM14-1.25 Thread 0.750 in. Reach 5/8 in. (16 mm) Hex Flat Seat Heat Range 10 0.020 in. Pre-Gap Nickel Center Electrode Sold Individually
The NGK 7942 Racing spark plug is a replacement plug. It has M14-1.25 threads, a 0.750 in. reach, a 5/8 in. (16 mm) hex and a heat range of 10. It is built for racing use, with electrode configurations chosen for durability and ignitability under race conditions.
NGK 7942 Racing Spark Plug Features:
- M14-1.25 metric thread with 0.750 in. reach
- 5/8 in. (16 mm) hex
- Flat seat with crush washer installed
- Heat range 10
- 0.020 in. factory pre-gap
- Nickel center electrode tip with nickel ground electrode tip
- Non-resistor design
- Non-removable nut terminal
- 1.990 in. insulator height
- Racing design with special electrode configurations for durability and ignitability under race conditions
- Alumina silicate ceramic insulator for high dielectric strength
- Copper core center electrode draws heat away from the firing end
- Rolled threads help prevent cross-threading in the cylinder head
- Intended for racing use
- Sold individually
Part TypeSpark Plug
BrandNGK SPARK PLUGS
Part CategoryPerformance Parts
Pre-Gap Size0.020 in
Ground Electrode Quantity1
Washer TypeCrush
Ground ConfigurationJ-Gap
Center Electrode Core MaterialCopper
Thread Type StandardMetric
Short Style Spark PlugNo
Washer(S) IncludedYes
Seat TypeFlat
Insulator Height1.990 in
Center Electrode Tip MaterialNickel
Center Electrode Insulator Tip Projection0.120 in
Ground Electrode Core MaterialNickel
Ground Electrode Tip MaterialNickel
Resistor TypeNo
Manufacturer Heat Range10
Reach0.750 in
Ground Electrode Tip DesignStandard
Electrical Terminal TypeNon-Removable Nut
Center Electrode DesignStandard
QuantitySold Individually
Thread SizeM14-1.25
Center Electrode ProjectionMid Projection
SkirtNo
Insulator MaterialCeramic
MetallurgyCopper
Part FitmentUniversal
Hex Size5/8 in (16 mm)
Vendor Part Number7942
Package Qty1
Package TypeEA
Some parts are not legal for use in California or other states with similar laws / regulations
![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Spark Plug Socket Set, 3/8 in. Drive [SAE/Metric 5-Piece]](https://www.jegs.com/images/mini_200/500/555/555-80509.jpg)


![Spark Plug Boot Puller [Adjustable]](https://www.jegs.com/images/mini_200/500/555/555-w80519.jpg)


![Wobble Extension Set, 1/4 in., 3/8 in. & 1/2 in. Drives [9-Piece]](https://www.jegs.com/images/mini_200/500/555/555-58210.jpg)

